4D Systems microCAM-III uCAM-III Image Sensor, 1fps, 5-Pin
- RS庫存編號:
- 175-7755
- 製造零件編號:
- uCAM-III
- 製造商:
- 4D Systems
32 現貨庫存,可於3工作日發貨。
單價 个
HK$458.40
單位 | 每單位 |
---|---|
1 - 4 | HK$458.40 |
5 - 9 | HK$444.50 |
10 + | HK$426.70 |
- RS庫存編號:
- 175-7755
- 製造零件編號:
- uCAM-III
- 製造商:
- 4D Systems
- COO (Country of Origin):
- CN
4D Systems serial camera module
The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.
Features and Benefits
• 5VDC nominal supply
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
Attribute | Value |
---|---|
Series | microCAM-III |
Frame Rate | 1fps |
Mounting Type | Through Hole |
Pin Count | 5 |
Dimensions | 32 x 32 x 15.6mm |
Length | 32mm |
Width | 32mm |
Height | 15.6mm |
Maximum Operating Supply Voltage | 9 V |
Maximum Operating Temperature | +85 °C |
Minimum Operating Supply Voltage | 4.5 V |
Minimum Operating Temperature | -30 °C |