The Vega vibrating level switch has a relay (DPDT) output. This level switch detects the minimum or maximum level reliably. The tuning fork is ideal for use in adhesive and abrasive products as well as in bulk solids with low density. It detects light bulk solids, even those down to 8g/L. The robust construction also makes it possible to use it in very heavy media. Vibrating Liquid/Solid Level Probes – Squings. All of these probes are maintenance-free and have an external LED switch status indication.
Features and Benefits
The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC Process fitting material is thread from G 1 A or 1 NPT
Easy setup without adjustment Product-independent switching point Rugged sensor construction Insensitive to build-up and statically charged products maintenance-free and does not wear External LED switch Housing material PBT (plastic) Housing protection Switching current is 400mA (maximum) Blocking current is greater than 100μA Switching delay ON: approx. 0.5 seconds/OFF: approx. 1 second Probe length is 220mm (8.7in)
Applications
Ideal level switch for almost all bulk solids applications Used for overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides Applications in heavy, fine to coarse bulk solids
