- RS庫存編號:
- 477-6666
- 製造零件編號:
- ETP CLASSIC 25MM
- 製造商:
- Lenze
12 在3 工作日內發貨 (海外庫存)
7 在4 工作日內發貨 (海外庫存)
已增加
單價 个
HK$1,808.03
單位 | Per unit |
1 - 5 | HK$1,808.03 |
6 + | HK$1,718.28 |
- RS庫存編號:
- 477-6666
- 製造零件編號:
- ETP CLASSIC 25MM
- 製造商:
- Lenze
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- JP
產品詳細資訊
ETP Classic Locking Bushes
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.
High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
規格
Attribute | Value |
---|---|
Shaft Diameter | 34mm |
Locking Bush Type | Locking Bush |
Flange Diameter | 49mm |
Length | 43mm |
Rated Torque | 250Nm |
Material | Steel |
Minimum Operating Temperature | -30°C |
Maximum Operating Temperature | +85°C |
Series | ETP CLASSIC |