Broadcom 1 Axis Motion Sensor Module 3 V 5.5V, SSI, PWM, UVW, TSSOP-16, 16-Pin
- RS庫存編號:
- 796-7802P
- 製造零件編號:
- AEAT-6600-T16
- 製造商:
- Broadcom
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計 243 件 (以袋裝提供)*
HK$30,253.50
库存信息目前无法访问 - 请稍候查看
單位 | 每單位 |
|---|---|
| 243 - 484 | HK$124.50 |
| 485 + | HK$121.70 |
* 參考價格
- RS庫存編號:
- 796-7802P
- 製造零件編號:
- AEAT-6600-T16
- 製造商:
- Broadcom
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Broadcom | |
| Sensor Type | Angular Magnetic Encoder | |
| Product Type | Motion Sensor Module | |
| Number of Axis | 1 | |
| Technology | CMOS, Hall Effect | |
| Interface Type | SSI, PWM, UVW | |
| Magnetic Type | Hall | |
| Maximum Frequency Response | 512kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | TSSOP-16 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 16 | |
| Series | AEAT-6600 | |
| Standards/Approvals | RoHS | |
| Length | 6.4mm | |
| Supply Current | 21mA | |
| Response Time | 11ms | |
| 選取全部 | ||
|---|---|---|
品牌 Broadcom | ||
Sensor Type Angular Magnetic Encoder | ||
Product Type Motion Sensor Module | ||
Number of Axis 1 | ||
Technology CMOS, Hall Effect | ||
Interface Type SSI, PWM, UVW | ||
Magnetic Type Hall | ||
Maximum Frequency Response 512kHz | ||
Minimum Supply Voltage 3V | ||
Package Type TSSOP-16 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 16 | ||
Series AEAT-6600 | ||
Standards/Approvals RoHS | ||
Length 6.4mm | ||
Supply Current 21mA | ||
Response Time 11ms | ||
Magnetic Encoders
The magnetic encoder IC range from Avago Technologies consists of contactless 10-bit to 16-bit programmable magnetic rotary encoders. They offer an internal voltage regulator and precise angular measurements throughout a full turn of 360°. A simple two-pole magnet is able to measure the angle by rotating it over the centre of the chip, positioned above or below the IC. The Avago magnetic rotary encoder IC is a system-on-chip (SoC), combining analog front end, digital signal processing and integrated Hall elements in a single device. A power-down mode is also available for the magnetic encoders in order to reduce current consumption. The Avago Technologies encoder ICs offer a user-programmable zero position, direction and index pulse width. A variety of possible applications include 3-phase commutation for brushless DC motor, resolver and potentiometer replacement and industrial automation and robotics.
Operating temperature: -40 to 125°C
Operation: 5V or 3.3V
Incremental output: 8 to 1024 cycles per revolution (CPR)
3-wire or 2-wire SSI interface mode for absolute output
Incremental output modes: ABI or UVW, and PWM
TSSOP-16 IC package