Microchip , 1-Channel Ethernet Transceiver 24-Pin QFN, KSZ8081RNDCA-TR
- RS庫存編號:
- 177-3053
- 製造零件編號:
- KSZ8081RNDCA-TR
- 製造商:
- Microchip
可享批量折扣
小計（1 包，共 10 件）*
HK$81.20
訂單超過 HK$250.00 免費送貨
有庫存
- 1,100 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 240 | HK$8.12 | HK$81.20 |
| 250 + | HK$7.96 | HK$79.60 |
* 參考價格
- RS庫存編號:
- 177-3053
- 製造零件編號:
- KSZ8081RNDCA-TR
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Standard Supported | IEEE 802.3 | |
| Number of Channels per Chip | 1 | |
| Typical Data Rate | 100Mbit/s | |
| Integrated CDR | Yes | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 24 | |
| Dimensions | 4 x 4 x 0.83mm | |
| Maximum Operating Temperature | +70 °C | |
| Minimum Operating Temperature | 0 °C | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Standard Supported IEEE 802.3 | ||
Number of Channels per Chip 1 | ||
Typical Data Rate 100Mbit/s | ||
Integrated CDR Yes | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 24 | ||
Dimensions 4 x 4 x 0.83mm | ||
Maximum Operating Temperature +70 °C | ||
Minimum Operating Temperature 0 °C | ||
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.
Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)