Phoenix Contact, 7.62mm Pitch, 3 Way, Pluggable Terminal Block, Plug, Cable Mount, Screw Termination, 1767012

A Phoenix Contact range of CLASSIC COMBICON 7.62mm pitch GMSTB PCB terminal blocks for using anywhere in the world. The 2.5 series terminal block cable mount plug-in connectors have a female socket and a 0.2 to 2.5mm2 screw termination.

• 180° wire entry
• Pitch of 7.62 mm for when you need increased voltage
• Wire to wire
• Screw connection
• Various positions
• 24-12 wire gauge range

For screwdriver see stock number 390-9641

Need to quickly connect and disconnect cables on your PCB (printed circuit board)? This terminal block from Phoenix Contact's CLASSIC COMBICON range lets you easily transmit power and data directly to your PCB. It comes with screw terminals that make installing and removing wires simple. The three connectors are tin-plated for conductivity and accept wires of between 0.2 and 2.5mm², giving a current capacity of up to 12A.
This terminal block is made from durable nylon with a UL (Underwriters Laboratories) 94 V-0 certification for fire safety, indicating it stops burning within 10 seconds. A straight body orientation means that wiring approaches the PCB vertically, giving maximum packing capacity. The 7.62mm pitch lets you use the connector for voltages up to 400V.
You can use this rigorously tested component for applications including board-to-board connections, programming and prototyping in the electronics industry.

• Industry-standard pin connection principle allows worldwide use
• Large connection contact area means a low temperature rise
• Spring-loaded screw terminal connectors hold wires in place while tightening
• Superior mechanical stability due to screwable flange
• Can be used for board-to-board, board-to-data, or board-to-supply connections

Phoenix Contact COMBICON 7.62mm Two Part Terminal Blocks

UL94V-0