ADAFRUIT INDUSTRIES FeatherWing Latching Relay for Adafruit Feather

查看此類別

小計（1 件）*

HK$64.70

Add to Basket
選擇或輸入數量
最後的 RS 庫存
  • 最終 5 個，準備發貨
單位
每單位
1 +HK$64.70

* 參考價格

RS庫存編號:
124-5527
Distrelec 貨號:
301-39-098
製造零件編號:
2923
製造商:
ADAFRUIT INDUSTRIES
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

ADAFRUIT INDUSTRIES

Power Management Function

Latching Relay

Product Type

Relay Board

For Use With

Adafruit Feather

Kit Classification

Development Board

Kit Name

FeatherWing

Standards/Approvals

No

Distrelec Product Id

30139098

Adafruit Latching Mini Relay FeatherWing


FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The latching mini relay FeatherWing gives you control over power so you can now turn on and off various devices including lamps, fans, solenoids. In fact, you can switch power for many small appliances that run on up to 250 V ac but you need check the amount of power – 60 W or less.

The latching relay, requires two pins, a SET and UNSET. Instead of keeping the SET pin high, you only have to pulse each pin high for 10 ms to latch the relay open or closed. You need two pins but save power.

In terms of how much power, you can switch up to 2A of resistive current at up to 30 V dc or 40 V ac. At 110 V dc, switch up to 0.3A, at 120 V ac up to 0.5 A, and at 250 V ac you can switch up to 0.6A. Check the datasheet for more details.

A 3-pin terminal block is supplied with this FeatherWing to wire it up with the device you are controlling and some light soldering is required.

A Non-Latching Relay FeatherWing is also available (RS 124-5530) and requires only a single signal pin.

50.8 x 22.9 x 11.4 mm / 2" x 0.9" x 0.45"

Weight: 5.3 g

Adafruit FeatherWing Add-On Boards


Note

If using with high voltages of more than 24 V, use care and common sense. High voltages require experience, and are only for use by engineers who are comfortable with guidelines and know how to use it safely.

相关链接