Infineon EB 2ED2410 3D 1BCDP MOSFET for Power MOSFET, Gate Driver for 2ED2410-EM 24 V Evaluation Motherboard

查看此類別

小計（1 件）*

HK$1,002.50

Add to Basket
選擇或輸入數量
庫存資訊目前無法查詢
單位
每單位
1 +HK$1,002.50

* 參考價格

RS庫存編號:
273-2058
製造零件編號:
EB2ED24103D1BCDPTOBO1
製造商:
Infineon
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Infineon

Power Management Function

MOSFET

Product Type

Gate Driver Module

For Use With

2ED2410-EM 24 V Evaluation Motherboard

Kit Classification

Evaluation Board

Featured Device

Power MOSFET, Gate Driver

Kit Name

EB 2ED2410 3D 1BCDP

Standards/Approvals

RoHS

EiceDRIVER™ APD 2ED2410-EM - 24 V evaluation MOSFET daughterboard, common drain, pre-charging


This daughterboard belongs to a family of evaluation boards that can be combined with the 2ED2410-EM 24 V evaluation motherboard (EB 2ED2410 3M). These daughterboards are used to address different MOSFET and shunt arrangements typically found in modern automotive power distributions for 12 and 24 V board nets.

This daughterboard EB 2ED2410 3D 1BCDP is addressing one load channel and consisting of two 60 V OptiMOSTM5 power MOSFET (1.1 mOhm) in a back2back common drain configuration. In addition, the load could be pre-charged with a dedicated pre-charge path.

Following other daughterboards are available:


•EB 2ED2410 3D 1BCS: 60 V OptiMOSTM5 power MOSFET (1.1 mOhm), back2back - common source, 0.5 mOhm shunt

•EB 2ED2410 3D 1BCD: 60 V OptiMOSTM5 power MOSFET (1.1 mOhm), back2back - common drain, 0.5 mOhm shunt

•EB 2ED2410 3D 1BCSP: 60 V OptiMOSTM5 power MOSFET (1.1 mOhm), back2back - common source, 0.5 mOhm shunt, with pre-charging

Summary of Features


•Suitable for 12 and 24 V board nets

•Combination with 2ED2410-EM 24 V evaluation motherboard (EB 2ED2410 3M)

•0,5 mOhm shunt resistor

•60 V OptiMOSTM5 power MOSFET (1,1 Ohm) suitable for 12 and 24 V board nets

•MOSFET temperature monitoring with NTC resistors

•Dedicated pre-charge path for loads with high input capacitance

•Nominal current up to 20 A continuous or 30 A for 10 min

相关链接