MCP1640 Boost Converter Evaluation Board

This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter

Easy-to-use and minimum number of external components power supply solution for applications powered by one-cell, two-cell, or three-cell alkaline, NiCd/NiMH; one-cell Li-Ion or Li-Polymer batteries

Selection of the best operating mode for efficiency (PWM/PFM)

A wide input voltage range (0.35 to 5.5V) and low start-up voltage (0.65V)

PCB layouts recommendation for SOT23-6 and 2x3mm-8 DFN packages

Three common output voltages to evaluate: 2.0V, 3.3V and 5.0V enable selection (when disabled, the MCP1640 disconnects the path from input to output for true-disconnect).

Input voltage range, VIN: 0.35V to 5.5V, with VIN ≤ VOUT; 1mA load after start-up

Fixed output voltage: 2.0V or 3.3V and 3.3V or 5.0V, selected using a mini dip switch on board

Output current: typical 100mA @ 3.3V Output, 1.2V Input or 350mA @ 5.0V Output, 3.3V Input

Start-up voltage: 0.65V at VIN = 1.2V, VOUT = 3.3V and IOUT = 1mA, resistive load

Automatic PFM/PWM Operation

PWM Switching Frequency = 500 kHz

Enable state selectable using mini-dip switch on board

Peak Input Current Limit up to 800mA

Over-temperature (if the die temperature exceeds 150°C, 10°C hysteresis)

單位	每單位
1 - 4	HK$375.80
5 +	HK$368.30

選取全部	屬性	值
	品牌	Microchip
	Product Type	Boost LED Regulator Evaluation Board
	Power Management Function	Boost Converter
	Kit Classification	Evaluation Board
	Featured Device	MCP1640
	Kit Name	Evaluation Board
	Standards/Approvals	ISO

	選取全部
	品牌 Microchip
	Product Type Boost LED Regulator Evaluation Board
	Power Management Function Boost Converter
	Kit Classification Evaluation Board
	Featured Device MCP1640
	Kit Name Evaluation Board
	Standards/Approvals ISO

Microchip Evaluation Board Boost Converter for MCP1640

訂單超過 HK$250.00 免費送貨

MCP1640 Boost Converter Evaluation Board

相关链接