Schneider Electric Screw Clamp 2NO (Push Button), NC (E-Stop) 2 Push Button Pendant Station

產品概覽和技術數據資料表
法例與合規
相容
COO (Country of Origin): FR
產品詳細資訊

Standard Pushbutton

Pre assembled double insulated crane pendants for single speed motor applications
Mechanically interlocked between pairs
For light duty Pendant switch see also Stock no 507481

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support

規格
Attribute Value
Series Harmony XACA
Number of Cutouts 2
Push Button Marking Down Arrow, Up Arrow
Push Button Colour Red
Push Button Style Mushroom
Number Of Push Buttons 2
Enclosure Colour Yellow
Enclosure Material PP
Contact Configuration NC (E-Stop), 2NO (Push Button)
IP Rating IP65
Push Button Actuation Trigger Action
Cable Termination Type Screw Clamp
Length 80mm
Terminal Type Screw
Width 107mm
Maximum Current 1.2 A @ 600 V ac, 100 mA @ 600 V dc
Maximum Operating Temperature +70°C
Maximum DC Voltage 600V
Dimensions 80 x 107 x 314 mm
Depth 314mm
Minimum Operating Temperature -25°C
Maximum AC Voltage 600V
2 現貨庫存,可於3工作日發貨。
單價 個
HK$ 777.92
(不含稅)
單位
Per unit
1 +
HK$777.92