Microchip HV9123NG-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, SOIC

RS庫存編號:: 829-3376
製造零件編號:: HV9123NG-G
製造商:: Microchip

Microchip HV9123NG-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, SOIC

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 包，共 5 件）*

HK$123.00

訂單超過 HK$250.00 免費送貨

暫時缺貨

從 2026年2月13日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每包*
5 - 10	HK$24.60	HK$123.00
15 - 20	HK$23.98	HK$119.90
25 +	HK$23.62	HK$118.10

* 參考價格

RS庫存編號:: 829-3376
製造零件編號:: HV9123NG-G
製造商:: Microchip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Maximum Switching Frequency	3 MHz
	Output Voltage	4.16 V
	Output Current	10 mA
	Control Method	Current, Voltage
	Number of Outputs	1
	Fall Time	75ns
	Mounting Type	Surface Mount
	Rise Time	75ns
	Package Type	SOIC
	Pin Count	16
	Dimensions	10 x 4 x 1.65mm
	Maximum Duty Cycle	99%
	PWM Controller Type	Current Mode
	Length	10mm
	Width	4mm
	Height	1.65mm
	Maximum Operating Temperature	+125 °C
	Maximum Operating Supply Voltage	13.5 V
	Minimum Operating Temperature	-55 °C
	Minimum Operating Supply Voltage	9 V

	選取全部
	品牌 Microchip
	Maximum Switching Frequency 3 MHz
	Output Voltage 4.16 V
	Output Current 10 mA
	Control Method Current, Voltage
	Number of Outputs 1
	Fall Time 75ns
	Mounting Type Surface Mount
	Rise Time 75ns
	Package Type SOIC
	Pin Count 16
	Dimensions 10 x 4 x 1.65mm
	Maximum Duty Cycle 99%
	PWM Controller Type Current Mode
	Length 10mm
	Width 4mm
	Height 1.65mm
	Maximum Operating Temperature +125 °C
	Maximum Operating Supply Voltage 13.5 V
	Minimum Operating Temperature -55 °C
	Minimum Operating Supply Voltage 9 V

HV912x Series High-Voltage Current-Mode PWM Controllers

The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.

These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

Features

10 to 450V input voltage range
<1.3 mA supply current
>1.0 MHz clock
>20:1 dynamic range @ 500 kHz
Low internal noise

Typical Applications

Off-line high frequency power supplies
Universal input power supplies
High density power supplies
Very high efficiency power supplies
Extra wide load range power supplies

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

PWM (Pulse Width Modulation) Controllers, Microchip