小計（1 件）*
HK$1,120.90
库存信息目前无法访问 - 请稍候查看
單位 | 每單位 |
|---|---|
| 1 + | HK$1,120.90 |
* 參考價格
- RS庫存編號:
- 190-8366
- 製造零件編號:
- 31311-A
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 123 KN | |
| Outside Diameter | 120 mm | |
| Cone Width | 31.5mm | |
| Standards/Approvals | No | |
| Static Load Rating | 139kN | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
End Type Open | ||
Bearing Dynamic Load Rating 123 KN | ||
Outside Diameter 120 mm | ||
Cone Width 31.5mm | ||
Standards/Approvals No | ||
Static Load Rating 139kN | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
相关链接
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG 22311-E1-XL-K Taper 55 mm ID Roller Bearing, 120 mm OD
- FAG JK0S030 Taper Roller 30 mm ID Roller Bearing, 55 mm OD
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- NTN 4T-30311D Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- FAG 33114 Taper Roller 70 mm ID Roller Bearing, 120 mm OD
- FAG 32924 Taper Roller 120 mm ID Roller Bearing, 165 mm OD
- FAG 33111 Taper Roller 55 mm ID Tapered Roller Bearing, 95 mm OD