Eaton 100A British Standard Fuse, A4, 500V ac, 94mm

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

• The low-temperature rise enables the fuse to be suitable for high-density mounting applications
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

• Features a 100 A current rating
• Holds a 550 V ac voltage rating
• Sits within the GG application category
• Dimensions are: L110mm x D21 mm x H58.5mm
• A4 fuse size

• Current rating of 100A and voltage rating of 550V AC for demanding applications
• Tag width of 14.3mm for easy attachment to a fuse holder
• Low power loss for greater productivity and a longer lifespan
• Compact fuse dimensions of 25 (diameter) by 110mm (length) for standard fitting

Fuse speed is the time taken for a fuse to break in the event of a fault current. It depends on the fuse element, the operating temperature and the overload current of the component.

Eaton formerly known as Bussmann