The Jumo Weld-in thermowell is used for the installation of thermocouples and resistance thermometers, if, for example, sensor replacement without system emptying and/or pressure resistance is required. The protective sleeve with internal thread M18 x 1.5 (DIN 43763, form D2) is designed for temperatures from 0 to 400 °C. The outer diameter of the protective tube is 24 mm and is stepped down to 12.5 mm.
Inside diameter and fitting length are 7 x 125 mm The total length of the protective sleeve is 200 mm The dimensions given refer to the thermometers The material of the protective sleeve is stainless steel 1.4571
