Bosch HSS-G Twist Drill Bit, 3mm Diameter, 61 mm Overall
- RS庫存編號:
- 768-3227
- 製造零件編號:
- 2608595055
- 製造商:
- Bosch
單價 个（每托盘 10 ）
HK$17.519
430 現貨庫存，可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
單位 | 每單位 | 每包** |
|---|---|---|
| 10 + | HK$17.519 | HK$175.19 |
** 參考價格
- RS庫存編號:
- 768-3227
- 製造零件編號:
- 2608595055
- 製造商:
- Bosch
不適用
- COO (Country of Origin):
- CN
HSS-G Metric Drill Bits (DIN 338)
High Speed Steel metric sized drill bits suitable for alloyed and non-alloyed steel, cast steel, iron and hard plastics.
Features and Benefits:
Precision ground for a faster drilling rate and lower feed pressure
Self centring drill bits
Self centring drill bits
Approvals and Certification:
• DIN338
• DIN1412C Quadruple Sharpening
• Bosch Standard Quality
• DIN1412C Quadruple Sharpening
• Bosch Standard Quality
Typical Applications:
These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials.
FAQs:
Can these drill bits be used with any SDS drill?
No, they are standard drills, will not fit into SDS chuck
What does jobber mean?
The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.
What are HSS and HSS-G?
An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-G drills bits are additionally ground at the tip and along with their flutes. HSS-G drill bits are ideal for high-performance, professional application and are ideal for drilling into an alloy and non-alloy steel, non-ferrous metals, grey cast iron and malleable iron, sintered iron.
No, they are standard drills, will not fit into SDS chuck
What does jobber mean?
The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.
What are HSS and HSS-G?
An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-G drills bits are additionally ground at the tip and along with their flutes. HSS-G drill bits are ideal for high-performance, professional application and are ideal for drilling into an alloy and non-alloy steel, non-ferrous metals, grey cast iron and malleable iron, sintered iron.
Standards
DIN 338
Bosch Drill Bit, Self-Centering Tip, 135° Point Angle - HSS-G Series - 2608595055
Buzz your way into an opening with this drill bit from Bosch. It's an HSS-G type, which means it has additional grounding at the tip. This makes it a practical choice for high-performance cuts in hard-wearing materials like steel, metal and iron. The unit's 135° self-centering split-point tip delivers steady surface contact for a precise finish. It also saves you the hassle of pre-punching or pilot drilling for up to 10mm. As the piece is suitable for hand and machine use, it's a versatile addition to your kit.
Features & Benefits
• Precision ground for up to 40% faster drilling rate and 50% lower feed pressure
• Spiral helix enables quick debris removal for efficient working
• Hard-wearing HSS body resists stress cracking
• Teams up with three-jaw drill chucks for fast and accurate results
• Spiral helix enables quick debris removal for efficient working
• Hard-wearing HSS body resists stress cracking
• Teams up with three-jaw drill chucks for fast and accurate results
Applications
• Marine engineering
• Storage facilities
• Furniture assembly
• Repair workshops
• Storage facilities
• Furniture assembly
• Repair workshops
How long is this bit?
It has an overall length of 61mm to reach deep spaces in your workpiece.
What hole sizes can I cut with this bit?
The component has a compact 3mm diameter, making it the right fit for drilling small holes.
Attribute | Value |
|---|---|
| Material | HSS-G |
| Drill Bit Type | Twist Drill Bit |
| Diameter | 3mm |
| Overall Length | 61 mm |
| Number of Pieces | 10 |