Texas Instruments TUSB4020BIPHP, Controller IC, 2-Channel 480 Mbps, 3.6V, USB 2.0, 0.99 V, 48-Pin HTQFP
- RS庫存編號:
- 133-0782
- 製造零件編號:
- TUSB4020BIPHP
- 製造商:
- Texas Instruments
此圖片僅供參考，請參閲產品詳細資訊及規格
庫存資訊目前無法查詢
- RS庫存編號:
- 133-0782
- 製造零件編號:
- TUSB4020BIPHP
- 製造商:
- Texas Instruments
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Texas Instruments | |
| Product Type | Controller IC | |
| Number of Transceivers | 2 | |
| Maximum Data Rate | 480Mbps | |
| USB Specification | USB 2.0 | |
| Sub Type | Controller | |
| Power Supply Type | Dual | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 0.99V | |
| Maximum Supply Voltage | 3.6V | |
| Mount Type | Surface | |
| Package Type | HTQFP | |
| Pin Count | 48 | |
| Supported Protocols | USB 2.0 | |
| Dual Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.05mm | |
| Standards/Approvals | No | |
| Series | TUSB4020BI | |
| Length | 7.2mm | |
| Supply Current | 39mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Texas Instruments | ||
Product Type Controller IC | ||
Number of Transceivers 2 | ||
Maximum Data Rate 480Mbps | ||
USB Specification USB 2.0 | ||
Sub Type Controller | ||
Power Supply Type Dual | ||
ESD Protection Yes | ||
Minimum Supply Voltage 0.99V | ||
Maximum Supply Voltage 3.6V | ||
Mount Type Surface | ||
Package Type HTQFP | ||
Pin Count 48 | ||
Supported Protocols USB 2.0 | ||
Dual Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.05mm | ||
Standards/Approvals No | ||
Series TUSB4020BI | ||
Length 7.2mm | ||
Supply Current 39mA | ||
Automotive Standard No | ||
USB Hub Controllers, Texas Instruments
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.