Infineon CYUSB3014-BZXC, USB Controller, 5Gbit/s, USB 2.0, 1.2 V, 121-Pin BGA
- RS庫存編號:
- 181-1591P
- 製造零件編號:
- CYUSB3014-BZXC
- 製造商:
- Infineon
可供預購。
單價 个 (以每盘装提供)
HK$225.63
單位 | 每單位 |
|---|---|
| 42 - 83 | HK$225.63 |
| 84 + | HK$220.77 |
- RS庫存編號:
- 181-1591P
- 製造零件編號:
- CYUSB3014-BZXC
- 製造商:
- Infineon
Universal serial bus (USB) integration
High-speed On-The-Go (HS-OTG) host and peripheral
compliant with OTG Supplement Version 2.0
Thirty-two physical endpoints
General Programmable Interface (GPIF™ II)
Programmable 100-MHz GPIF II enables connectivity to a
wide range of external devices
8-, 16-, 24-, and 32-bit data bus
Up to16 configurable control signals
Fully accessible 32-bit CPU
ARM926EJ core with 200-MHz operation
512-KB or 256-KB embedded SRAM
Additional connectivity to the following peripherals
SPI master at up to 33 MHz
UART support of up to 4 Mbps
I2C master controller at 1 MHz
I2S master (transmitter only) at sampling frequencies of
8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz
Selectable clock input frequencies
19.2, 26, 38.4, and 52 MHz
19.2-MHz crystal input support
Ultra low-power in core power-down mode
Less than 60 μA with VBATT on and 20 μA with VBATT off
Independent power domains for core and I/O
Core operation at 1.2 V
I2S, UART, and SPI operation at 1.8 to 3.3 V
I2C operation at 1.2 V to 3.3 V
Package options
121-ball, 10- ´ 10-mm, 0.8-mm pitch Pb-free ball grid array
(BGA)
EZ-USB® Software Development Kit (SDK) for code development of firmware and PC Applications
Includes RTOS Framework (using ThreadX Version 5)
Firmware examples covering all I/O modules
Visual Studio host examples using C++ and C#
SuperSpeed Explorer Board available for rapid prototyping
Several accessory boards also available:
Adapter boards for Xilinx/Altera FPGA development
Adapter board for Video development
CPLD board for concept testing and initial development
High-speed On-The-Go (HS-OTG) host and peripheral
compliant with OTG Supplement Version 2.0
Thirty-two physical endpoints
General Programmable Interface (GPIF™ II)
Programmable 100-MHz GPIF II enables connectivity to a
wide range of external devices
8-, 16-, 24-, and 32-bit data bus
Up to16 configurable control signals
Fully accessible 32-bit CPU
ARM926EJ core with 200-MHz operation
512-KB or 256-KB embedded SRAM
Additional connectivity to the following peripherals
SPI master at up to 33 MHz
UART support of up to 4 Mbps
I2C master controller at 1 MHz
I2S master (transmitter only) at sampling frequencies of
8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz
Selectable clock input frequencies
19.2, 26, 38.4, and 52 MHz
19.2-MHz crystal input support
Ultra low-power in core power-down mode
Less than 60 μA with VBATT on and 20 μA with VBATT off
Independent power domains for core and I/O
Core operation at 1.2 V
I2S, UART, and SPI operation at 1.8 to 3.3 V
I2C operation at 1.2 V to 3.3 V
Package options
121-ball, 10- ´ 10-mm, 0.8-mm pitch Pb-free ball grid array
(BGA)
EZ-USB® Software Development Kit (SDK) for code development of firmware and PC Applications
Includes RTOS Framework (using ThreadX Version 5)
Firmware examples covering all I/O modules
Visual Studio host examples using C++ and C#
SuperSpeed Explorer Board available for rapid prototyping
Several accessory boards also available:
Adapter boards for Xilinx/Altera FPGA development
Adapter board for Video development
CPLD board for concept testing and initial development
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Attribute | Value |
|---|---|
| Number of Transceivers | 1 |
| Data Rate | 5Gbit/s |
| IC Type | Controller IC |
| Protocols Supported | USB 2.0 |
| Power Supply Type | Single |
| ESD Protection | Yes |
| Typical Single Supply Voltage | 1.2 V |
| Mounting Type | Surface Mount |
| Package Type | BGA |
| Pin Count | 121 |
| Dimensions | 10 x 10 x 1.05mm |
| Height | 1.05mm |
| Length | 10mm |
| Maximum Operating Temperature | +70 °C |
| Minimum Operating Temperature | 0 °C |
| Width | 10mm |