Phoenix Contact 1 Channel Galvanic Barrier, Isolating Amplifier, NAMUR Sensor, Switch Input, Relay Output, ATEX
- RS庫存編號:
- 709-9656
- 製造零件編號:
- 2924045
- 製造商:
- Phoenix Contact
Price 个**
HK$1,436.00
3 現貨庫存，可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 HK$850.00 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 + | HK$1,436.00 |
** 參考價格
- RS庫存編號:
- 709-9656
- 製造零件編號:
- 2924045
- 製造商:
- Phoenix Contact
- COO (Country of Origin):
- DE
Ex i NAMUR Isolating Amplifier for Proximity Sensors and Switches
The signals are transmitted via a relay output (PDT contact) to the safe area
Line fault detection (LFD), 3-way isolation, SIL 2
Line fault detection (LFD), 3-way isolation, SIL 2
Group and Category
EN 61326, ATEX II (1) GD [Ex ia] IIC, Ex II 3 G Ex nAC IIC T4 X, [Ex ia] IIC; [Ex iaD]; Ex nAC IIC T4 X, SIL 2 according to EN 61508, CUL Listed, UL Listed, IECEx, UL-EX LIS / CUL-EX LIS
Approvals
CE-compliant
Phoenix Contact Galvanic Barrier, 125V DC, 253V AC - MACX MCR-EX-SL-NAM-R-SP - 2924045
This galvanic barrier from Phoenix Contact is an isolation amplifier that isolates high DC (direct current) levels from your device while passing a low AC (alternating current) signal. The barrier provides extra safety to your electrical device by protecting your input and output circuits from each other.
If an error occurs in this unit, the LED (light-emitting diode) indicator will illuminate to let you know. There's also an indicator that signals supply voltage and switching state, making it simple to use. The device has three-way isolation, controlling two separate output signals at one time while preventing short circuit hazards and current interference for greater safety and efficiency.
This component is built for use with proximity sensors and switches in explosive atmospheres. It can also be used in other monitoring applications such as laboratory testing, technical measurements and medical equipment.
If an error occurs in this unit, the LED (light-emitting diode) indicator will illuminate to let you know. There's also an indicator that signals supply voltage and switching state, making it simple to use. The device has three-way isolation, controlling two separate output signals at one time while preventing short circuit hazards and current interference for greater safety and efficiency.
This component is built for use with proximity sensors and switches in explosive atmospheres. It can also be used in other monitoring applications such as laboratory testing, technical measurements and medical equipment.
Features & Benefits
• Distinctive Phoenix Contact green colour lets you spot it easily on your DIN rail
• ATEX hazardous area certification for use in potentially explosive environments
• Broad operating temperature range of -20°C to +60°C for use in demanding conditions
• Contacts are gold-plated to prevent corrosion for long-lasting performance
• ATEX hazardous area certification for use in potentially explosive environments
• Broad operating temperature range of -20°C to +60°C for use in demanding conditions
• Contacts are gold-plated to prevent corrosion for long-lasting performance
Attribute | Value |
|---|---|
| Number of Channels | 1 |
| Module Type | Isolating Amplifier |
| Barrier Type | Galvanic Barrier |
| Output Signal Type | Relay |
| Maximum Voltage | 125 V dc, 253 V ac |
| Hazardous Area Certification | ATEX |
| Input Signal Type | NAMUR Sensor, Switch |
| Maximum Operating Temperature | +60°C |
| Minimum Operating Temperature | -20°C |
| Maximum Current | 10mA |
| Supply Voltage | 19.2 → 30V dc |
| Safety Current Maximum | 10mA |
| Safety Voltage Maximum | 125 V dc, 253 V ac |
| Series | MACX MCR-EX-SL-NAM |
| Operating Temperature Range | -20 → +60°C |