Thread Taps | Thread Tapping Tool | RS
最近搜索

    Threading Taps

    Threading taps are a tool used to create screw threads (tapping) into a pre-drilled hole, to create a clean fitting for bolts in metals and plastics. Used in engineering and manufacturing, threading taps work like a drill but due to the unique shape of a tap, when screwed into a piece of material, screw threads are created. Threading taps must be used in a predrilled hole and cannot be used for drilling entire holes.

    The difference between taps and dies is that taps are used to create or repair threads in holes which is ideal for nuts. Dies are used to cut threads on materials such as steel rods to allow a fitting to be screwed on and attached (threading). The tap is designed for internal thread cutting, so this would be used on the fastener hole or a nut, whereas a die is used for the external thread, like on a bolt. In other words, tapping uses the tap part of the set and creates internal threads and threading is the process used by the die to cut external threads.

    Threading Taps are available in HSS (high-speed steel) and carbide and can be used by hand or machine. Our range of threading taps offers the best tool for every machining method or process to meet all your requirements. Threading taps can be used with a tap wrench or power tool and are available in various sizes to accommodate a range of applications.

    Taps can be used by machinists in different ways for different applications:

    • Taper taps or starter taps, are used to initially start a new thread with the first 7-10 threads having a flatter profile than those further up the shaft.
    • Plug taps are similar to taper taps but only have 3-5 starting rows ground down leaving more shaft to create a thread.
    • Bottom taps are square in profile with no ground down threads and are used after a taper or plug tap has been used. Their full length cutting shape allow for threads to be cut at the very bottom of a hole for maximum thread length.
    • Spiral flute taps – for blind hole applications
    • Spiral point taps – push chips forward, ideal for through-hole applications
    • Straight flute taps – most commonly, designed for short chipping materials
    • Forming taps – compresses to produce a thread rather than cutting
    • Taps come in both Metric and Imperial dimensions and can have different shank types. Threading taps are used in conjunction with a tap wrench so always consider the maximum side tap your wrench can hold when purchasing.

    1019 產品顯示為 Threading Taps

    • RS庫存編號 270-5628
    • 製造零件編號 950103101400200
    整套:1 个
    HK$988.60
    Tivoly
    Taps
    M14
    Hand Taps
    2mm
    Metric
    -
    -
    95 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    • RS庫存編號 272-9279
    • 製造零件編號 E5315/32NO1
    HK$123.70
    Dormer
    Flute Hand Tap
    -
    Straight Flute Hand Tap
    -
    BSW
    -
    -
    53 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    • RS庫存編號 272-9248
    • 製造零件編號 E5158-32NO6
    HK$321.80
    Dormer
    Flute Hand Tap
    -
    Straight Flute Hand Tap
    -
    UNC
    -
    -
    53 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    • RS庫存編號 705-9488
    • 製造零件編號 EP01 M10
    HK$323.20
    Dormer
    Threading Tap
    M10
    Spiral Flute
    1.5mm
    Metric
    Right Hand
    1
    100 mm
    -
    Machine Tap
    HSS-XS1
    10 mm
    -
    -
    -
    6H
    • RS庫存編號 270-5650
    • 製造零件編號 960301101600150
    HK$435.30
    Tivoly
    -
    MF16
    Machine Tap
    1.5mm
    Metric Fine
    -
    -
    110 mm
    -
    -
    HSS-Co
    -
    -
    -
    -
    -
    HK$188.50
    Dormer
    Threading Tap
    M3
    Straight Flute
    0.5mm
    Metric
    Left Hand
    1
    56 mm
    -
    Machine Tap
    HSS-E
    3.5 mm
    -
    -
    -
    6H
    • RS庫存編號 300-0110
    • 製造零件編號 E513-M6/0,75
    HK$140.10
    Dormer
    Threading Tap
    M6
    Straight Flute
    0.75mm
    Metric Fine
    Right Hand
    1
    66 mm
    ISO
    Machine Tap
    HSS
    6.3 mm
    -
    -
    -
    6H
    HK$89.00
    EVENTUS
    Threading Tap
    M12
    Spiral Point
    1.75mm
    Metric
    -
    1
    110 mm
    -
    Machine Tap
    HSS-G
    9 mm
    -
    -
    -
    6H
    • RS庫存編號 508-9496
    • 製造零件編號 10016
    HK$87.10
    EVENTUS
    Hand Tap
    M6
    Hand Tap
    -
    -
    -
    3
    -
    -
    -
    HSS
    -
    -
    -
    -
    -
    • RS庫存編號 508-9395
    • 製造零件編號 20003
    HK$33.10
    EVENTUS
    Threading Tap
    M5
    Short Machine
    0.8mm
    Metric
    -
    1
    50 mm
    -
    -
    HSS
    -
    -
    -
    -
    6H
    HK$266.00
    Dormer
    Threading Tap
    M5
    Spiral Flute
    0.8mm
    Metric
    Right Hand
    1
    70 mm
    -
    Machine Tap
    HSS
    6 mm
    -
    -
    -
    -
    HK$475.50
    Dormer
    Threading Tap
    M12
    Spiral Flute
    1.75mm
    Metric
    Right Hand
    1
    110 mm
    -
    Machine Tap
    HSS
    12 mm
    -
    -
    -
    -
    • RS庫存編號 270-5653
    • 製造零件編號 960302102700150
    HK$1,418.68
    Tivoly
    -
    MF27
    Machine Tap
    1.5mm
    Metric Fine
    -
    -
    140 mm
    -
    -
    HSS-Co
    -
    -
    -
    -
    -
    • RS庫存編號 270-5649
    • 製造零件編號 960301101400150
    HK$348.02
    Tivoly
    -
    MF14
    Machine Tap
    1.5mm
    Metric Fine
    -
    -
    374 mm
    -
    -
    HSS-Co
    -
    -
    -
    -
    -
    • RS庫存編號 270-5631
    • 製造零件編號 952101100780090
    整套:1 个
    HK$2,019.89
    Tivoly
    Taps
    7/8 in
    Hand Taps
    9mm
    UNC
    -
    -
    110 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    • RS庫存編號 273-0207
    • 製造零件編號 E513M18X1.5NO1
    HK$545.10
    Dormer
    Hand Tap
    M18
    Straight Flute Hand Tap
    1.5mm
    Metric Fine
    Right Hand
    -
    112 mm
    -
    -
    HSS
    -
    -
    -
    -
    -
    • RS庫存編號 270-5655
    • 製造零件編號 960582100400070
    HK$255.97
    Tivoly
    -
    M4
    Machine Tap
    0.7mm
    Metric
    -
    -
    63 mm
    -
    -
    HSS-E-PM
    -
    -
    -
    -
    -
    • RS庫存編號 272-9286
    • 製造零件編號 E5315/8NO6
    HK$1,028.40
    Dormer
    Flute Hand Tap
    -
    Straight Flute Hand Tap
    -
    BSW
    -
    -
    102 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    • RS庫存編號 270-5445
    • 製造零件編號 1050294050080
    HK$121.33
    Tivoly
    -
    M5
    Taps
    80mm
    Metric
    Left Hand
    -
    41 mm
    -
    -
    High Speed Steel
    -
    -
    -
    -
    -
    HK$294.50
    Dormer
    Threading Tap
    M10
    Spiral Point
    1.5mm
    Metric
    Right Hand
    1
    100 mm
    -
    Machine Tap
    HSS-XS1
    10 mm
    -
    -
    -
    6H
    每頁顯示的結果