Microchip RN42-I/RM630 Bluetooth Chip 2.1

RS庫存編號:: 123-8533
製造零件編號:: RN42-I/RM630
製造商:: Microchip

Microchip RN42-I/RM630 Bluetooth Chip 2.1

可享批量折扣

小計（1 件）*

HK$216.20

訂單超過 HK$250.00 免費送貨

最後的 RS 庫存

最終 12 個，準備發貨

單位	每單位
1 - 4	HK$216.20
5 - 9	HK$211.90
10 +	HK$207.60

* 參考價格

RS庫存編號:: 123-8533
製造零件編號:: RN42-I/RM630
製造商:: Microchip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Bluetooth Class	Class 2
	Product Type	Bluetooth Chip
	Bluetooth Version	2.1
	Data Rate	3Mbps
	Receiver Sensitivity	-80dBm
	Frequency	2.48GHz
	Interface Type	USB, SPI, UART, PCM, GPIO
	Minimum Supply Voltage	3V
	Maximum Supply Voltage	3.6V
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Height	2.4mm
	Width	25.8 mm
	Length	13.4mm
	Standards/Approvals	No
	Series	RN42

	選取全部
	品牌 Microchip
	Bluetooth Class Class 2
	Product Type Bluetooth Chip
	Bluetooth Version 2.1
	Data Rate 3Mbps
	Receiver Sensitivity -80dBm
	Frequency 2.48GHz
	Interface Type USB, SPI, UART, PCM, GPIO
	Minimum Supply Voltage 3V
	Maximum Supply Voltage 3.6V
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Height 2.4mm
	Width 25.8 mm
	Length 13.4mm
	Standards/Approvals No
	Series RN42

Datasheet

RN-42 Bluetooth 2.1 + EDR Class 2 Module, SPP profile

The Microchip RN42 Class 2 Bluetooth Module is a small form factor, low power and simple to integrate solution for adding Bluetooth communications into designs. The RN42 is fully certified, supports multiple interface protocols and features low power consumption making it an ideal embedded solution.

Features

Fully qualified Bluetooth version 2.1 module; supports version 2.1 + Enhanced Data Rate (EDR)

Backwards-compatible with Bluetooth 2.0, 1.2 and 1.1

ASCII command interface over UART

Low-power Consumption: 26 μA sleep, 3 mA connected, 30 mA transmit

Small form factor

UART (SPP or HCI) and USB (HCI only) data connection interfaces

Embedded Bluetooth stack profiles include GAP, SDP, RFCOMM, L2CAP protocols, with SPP, HID and DUN profile support

Bluetooth SIG qualified

Castellated SMT pads for PCB mounting (RN42 / RN42N) or 2 x 10 socket compatible pins (RN42XV)

Class 2 power amplifier

PCB antenna (RN42 / RN42XVP), No antenna (RN42N), U.FL antenna socket (RN42XVU)

AES-128 encryption

Compatible with Microchip Microcontroller Families (PIC16F, PIC18F, PIC24F/H, dsPIC33 and PIC32)

Performance

RF Frequency Range: 2.402 GHz to 2.480 GHz with 79 channels

RF Output Power: +4 dBm

Receiver Sensitivity: -80 dBm

Range up to 10 metres

Sustained SPP data rates: 240 Kbps (Slave mode), 300 Kbps (Master mode)

HCI data rates: 1.5 Mbps sustained, 3.0 Mbps burst in HCI mode

Host communication: serial UART with RTS/CTS flow control

Power supply: +3.0 V to +3.6 V dc

Bluetooth - Microchip

Approvals

Bluetooth, FCC, IC, CE