Energizer A76 Button Battery, 1.5 V, 11.6 mm Diameter, 2 Pack
- RS庫存編號:
- 683-377
- 製造零件編號:
- 7638900083071
- 製造商:
- Energizer
小計(1 包,共 2 件)*
HK$12.90
訂單超過 HK$250.00 免費送貨
有庫存
- 1,410 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
包 | 每包 | 每單位* |
|---|---|---|
| 1 + | HK$12.90 | HK$6.45 |
* 參考價格
- RS庫存編號:
- 683-377
- 製造零件編號:
- 7638900083071
- 製造商:
- Energizer
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Energizer | |
| Battery Size | A76 | |
| Product Type | Button Battery | |
| Chemistry | Manganese Dioxide | |
| Nominal Voltage | 1.5V | |
| Battery Capacity | 175mAh | |
| Diameter | 11.6mm | |
| Number of Batteries | 2 | |
| Termination Type | Flat Contact | |
| NEDA Code | 1166 A | |
| Standards/Approvals | No | |
| Weight | 1.85g | |
| IEC Code | Iec-Lr44 | |
| 選取全部 | ||
|---|---|---|
品牌 Energizer | ||
Battery Size A76 | ||
Product Type Button Battery | ||
Chemistry Manganese Dioxide | ||
Nominal Voltage 1.5V | ||
Battery Capacity 175mAh | ||
Diameter 11.6mm | ||
Number of Batteries 2 | ||
Termination Type Flat Contact | ||
NEDA Code 1166 A | ||
Standards/Approvals No | ||
Weight 1.85g | ||
IEC Code Iec-Lr44 | ||
豁免
- COO (Country of Origin):
- CN
Energizer Button Battery, 1.5V Nominal Voltage, 175mAh Capacity - 7638900083071
This button battery is a small 1.5V coin cell designed to supply portable electronic devices that require compact, steady power. It uses a manganese dioxide chemical system and is intended for applications that demand continuous low-drain operation with occasional high-rate pulses. The pack contains two cells and is suited to items where long service life at light loads is important.
Features and Benefits:
• 175mAh capacity provides extended runtime under light loads
• 1.5V nominal output maintains stable voltage for electronics
• Flat contact termination enables simple device installation
• Low impedance (5-15Ω at 40Hz) supports Pulse currents
• Typical weight 1.85g minimises added device mass
• 1.5V nominal output maintains stable voltage for electronics
• Flat contact termination enables simple device installation
• Low impedance (5-15Ω at 40Hz) supports Pulse currents
• Typical weight 1.85g minimises added device mass
Applications
• Suitable for watches and small timing devices
• Suitable for handheld calculators and remote controls
• Used with small toys requiring Compact power sources
• Used for medical instruments with low continuous drain
• Can be used for LED indicators and small sensors
• Suitable for handheld calculators and remote controls
• Used with small toys requiring Compact power sources
• Used for medical instruments with low continuous drain
• Can be used for LED indicators and small sensors
How long will the cell operate under continuous light load?
At a continuous drain of 0.191mA (6.8KΩ load) it provides about 915 hours to 0.9V.
What happens to the cell as it discharges?
The cell may bulge during discharge but will not exceed its specified maximum height.
How is capacity measured for these cells?
Capacity is determined at 21°C using a 6.8KΩ continuous drain until cut‑off at 0.9V.
What is the typical internal impedance and its significance?
Measured at 40Hz, impedance ranges 5-15Ω which allows brief high-rate pulses while supplying low-drain devices.
What form factor and chemistry should be expected?
The cells use a manganese dioxide system in a miniature coin format with flat contacts for installation.
相关链接
- RS PRO Black Nylon Cable Gland 5mm Min IP68
- Schneider Electric Analogue DIN Rail Time Switch 250 V ac, 1-Channel
- Belden Cat6 Ethernet Cable Blue LSZH Sheath, 304m
- Prysmian 6491B Series Green/Yellow 2.5 mm² Hook Up Wire 100m
- https://hkcn.rs-online.com/web/p/coaxial-cable/2662163
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Digital, Relay
- ebm-papst 4400 F Series Axial Fan DC Operation 5.3W 119 x 119 x 25mm
- RS PRO 2 Core Power Cable 1000, 600 V
