The Atmel ZigBit™ extension board ATZB-212B-XPRO supports the AT86RF212B wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. Designed for IEEE 802.15.4-2003/2006, IEEE 802.15.4c-2009 compliant WPAN communication and ZigBee mesh network operation, it also supports the 6LoWPAN protocol.
ZigBit Sub-1GHz AT86RF212B Module Xplained Pro 20-pin connector Headers for ZigBit pins not routed to Xplained Pro connector Header for monitoring ZigBit current ZigBit reset pushbutton
ZigBit ATZB-RF-212B module AT86RF212B 700/800/900MHz ISM-Band Transceiver chip RF Output Power: Up to +10dBm Receiver sensitivity: -110dBm Modulation: BPSK, O-QPSK OTA data rate: Up to 1Mbps AES-128 encryption MAC hardware accelerator Pre-loaded with Atmel assigned 64-bit MAC address 128byte FIFO Tx/Rx buffer Host communication: serial SPI Built-in chip antenna MS-147 RF test connector Power supply: +1.8 to +3.6Vdc Dimensions: 25 x 20 x 3.2mm Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)
