- RS庫存編號:
- 779-554
- 製造商:
- RS PRO
- RS庫存編號:
- 779-554
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- GB
產品詳細資訊
RS Hand Crimp Plier Tool for Bootlace Ferrules
RS hand crimp plier tool for crimping bootlace ferrules with a wire size range of 0.5 to 16mm2. The crimping indents of this bootlace ferrule hand crimp plier tool are clearly marked with the different wire size ranges.
Features and Benefits
Supports a wire size of 0.5 to 16 mm²
Suitable for crimping bootlace ferrules
Ensures integrity the connector termination
The indents are clearly marked with the different wire size ranges
Suitable for crimping bootlace ferrules
Ensures integrity the connector termination
The indents are clearly marked with the different wire size ranges
Typical Applications
Maintenance & repair
Electrical Installations
Computer Interfacing
Cable assemblies
Electrical Installations
Computer Interfacing
Cable assemblies
FAQ:
How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.
How do you maintain the product?
Movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.
How do you maintain the product?
Movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
規格
Attribute | Value |
---|---|
Product Type | Crimp Tool |
Operation | Hand |
For Use With | Wire End Sleeves |
Wire Size mm² | 0,5 → 16mm² |
Ratcheting | No |
Overall Length | 240 mm |