小計（1 件）*
HK$4,268.70
訂單超過 HK$250.00 免費送貨
有庫存
- 4 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | HK$4,268.70 |
* 參考價格
- RS庫存編號:
- 172-3027
- 製造零件編號:
- 8.07.10 J-Trace Isolator
- 製造商:
- SEGGER
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SEGGER | |
| Product Type | Programmer | |
| Kit Name | J-Trace Isolator | |
| For Use With | 19 Pin Cortex-M, ARM-Board | |
| 選取全部 | ||
|---|---|---|
品牌 SEGGER | ||
Product Type Programmer | ||
Kit Name J-Trace Isolator | ||
For Use With 19 Pin Cortex-M, ARM-Board | ||
- COO (Country of Origin):
- DE
SEGGER Microcontroller J-Trace
The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential when the development tools are not connected to the same ground. It is useful to protect the development tools from electrical spikes that often occur in some applications.
Features and Benefits:
• 1 kV DC isolation
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz