DSPIC33EP512GP502-I/SP Microchip, 16bit Digital Signal Processor 5.5MHz 512 kB Flash 28-Pin PDIP

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Digital Signal Processors
可享批量折扣

小計（1 管，共 15 件）*

HK$703.995

Add to Basket
選擇或輸入數量
最後的 RS 庫存
  • 最終 120 個，準備發貨
單位
每單位
每管*
15 - 15HK$46.933HK$704.00
30 - 45HK$46.00HK$690.00
60 +HK$45.073HK$676.10

* 參考價格

RS庫存編號:
178-4847
製造零件編號:
DSPIC33EP512GP502-I/SP
製造商:
Microchip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Microchip

Maximum Frequency

5.5MHz

Data Bus Width

16bit

RAM Size

48 kB

Instruction Set Architecture

RISC

Program Memory Size

512 kB

Program Memory Type

Flash

Mounting Type

Through Hole

Package Type

PDIP

Pin Count

28

Typical Operating Supply Voltage

3 to 3.6 V

Number of UART Channels

2

Pulse Width Modulation

0

Dimensions

35.36 x 7.49 x 3.81mm

Width

7.49mm

Timers

5 x 16 bit, 5 x 32 bit

Number of Ethernet Channels

0

Number of PCI Channels

0

Timer Resolution

16 bit, 32bit

Height

3.81mm

Number of LIN Channels

0

Number of USART Channels

0

Number of I2C Channels

2

Number of SPI Channels

2

Number of ADC Units

1

Length

35.56mm

ADCs

6-ch x 10 bit, 6-ch x 12 bit

ADC Resolution

10 bit, 12bit

Number of CAN Channels

1

ADC Channels

12

Minimum Operating Temperature

-40 °C

USB Channels

1

Maximum Operating Temperature

+85 °C

Number of Timers

10

dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers


The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.

Microcontroller Features


70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)

Peripherals


High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


相关链接