Festo MS Filter Regulator, 40 μm, G1 in, Automatic, 12 bar, 8232924

RS庫存編號:: 793-146
製造零件編號:: MS6-LFR-AGF-D7-E-R-V
製造商:: Festo

Festo MS Filter Regulator, 40 μm, G1 in, Automatic, 12 bar, 8232924

小計（1 件）*

HK$1,637.28

訂單超過 HK$250.00 免費送貨

製造商存貨

準備從 2026年11月24日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$1,637.28

* 參考價格

RS庫存編號:: 793-146
製造零件編號:: MS6-LFR-AGF-D7-E-R-V
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Port Size	G1 in
	Product Type	Filter Regulator
	Maximum Flow Rate	4500L/min
	Maximum Operating Pressure	12 bar
	Connection Thread Standard	G
	Series	MS
	Drain Type	Automatic
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010
	Bowl Material	Polycarbonate
	Pressure Setting Range	0.5 → 12 bar
	Pressure Gauge Port Thread Standard	G
	Model Number	8232924

	選取全部
	品牌 Festo
	Port Size G1 in
	Product Type Filter Regulator
	Maximum Flow Rate 4500L/min
	Maximum Operating Pressure 12 bar
	Connection Thread Standard G
	Series MS
	Drain Type Automatic
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010
	Bowl Material Polycarbonate
	Pressure Setting Range 0.5 → 12 bar
	Pressure Gauge Port Thread Standard G
	Model Number 8232924

Datasheet - MS6-LFR-AGF-D7-E-R-V

COO (Country of Origin):: HU

Festo Series MS Filter Regulator, 0.50 to 12 bar Pressure Setting Range, 40μm Filtration Size - MS6-LFR-AGF-D7-E-R-V, Numeric Part Number: 8232924

This filter regulator provides pressure conditioning and particulate removal for compressed Air and inert gases in industrial pneumatic systems. It combines pressure regulation with particulate separation and an integral gauge port thread to enable system monitoring. Designed for in-line or front-panel mounting, it operates across typical workshop temperatures and is compatible with compressed Air specified to ISO 8573-1:2010.

Features and Benefits:

• 4500 L/min flow rate delivers high-volume Air for large systems
• 0.5 to 12 bar regulation range supports broad pressure requirements
• Fully automatic condensate drain reduces manual maintenance
• Polycarbonate bowl with guard allows visible contaminant inspection
• 40μm filtration improves downstream component longevity

Applications

• Suitable for supply conditioning to pneumatic actuators
• Ideal for paint-spray preparation with particulate control
• Used with inert gas lines requiring regulated pressure
• Can be used for workshop Air mains delivering high flow
• Suitable for front-panel integration in control stations

What materials contact the medium inside the unit?

Seals and membrane are MADE from NBR while the bowl is Makrolon® and the internal separating plate is POM.

How should it be mounted for correct operation?

It may be installed in-line or mounted to a front panel and must be mounted vertical ±5° for intended drainage.

What temperatures can it withstand during storage and use?

The unit is rated for use and storage within a range of -10°C to 60°C.

Which gases is it compatible with?

It is suitable for compressed Air meeting ISO 8573-1:2010 and for inert gases.

What materials contribute to moderate corrosion resistance?

Die-cast aluminium housing and sub-base with CRC2 classification provide moderate corrosion stress resistance.