Festo MS Filter Regulator, 40 μm, G3/8 in, Manual, 20 bar, 8232907

RS庫存編號:: 793-238
製造零件編號:: MS6-LFR-3/8-D7-E-R-M-VS
製造商:: Festo

Festo MS Filter Regulator, 40 μm, G3/8 in, Manual, 20 bar, 8232907

小計（1 件）*

HK$785.87

訂單超過 HK$250.00 免費送貨

製造商存貨

準備從 2026年11月24日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$785.87

* 參考價格

RS庫存編號:: 793-238
製造零件編號:: MS6-LFR-3/8-D7-E-R-M-VS
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Product Type	Filter Regulator
	Port Size	G3/8 in
	Maximum Operating Pressure	20 bar
	Maximum Flow Rate	4000L/min
	Connection Thread Standard	G
	Series	MS
	Drain Type	Manual
	Filtration Size	40μm
	Pressure Gauge Port Size	3/8 in
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO 8573-1:2010
	Bowl Material	Polycarbonate
	Model Number	8232907
	Pressure Gauge Port Thread Standard	G
	Pressure Setting Range	0.5 → 12 bar

	選取全部
	品牌 Festo
	Product Type Filter Regulator
	Port Size G3/8 in
	Maximum Operating Pressure 20 bar
	Maximum Flow Rate 4000L/min
	Connection Thread Standard G
	Series MS
	Drain Type Manual
	Filtration Size 40μm
	Pressure Gauge Port Size 3/8 in
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO 8573-1:2010
	Bowl Material Polycarbonate
	Model Number 8232907
	Pressure Gauge Port Thread Standard G
	Pressure Setting Range 0.5 → 12 bar

COO (Country of Origin):: HU

Festo Series MS Filter Regulator, 0.50 to 12 bar Pressure Setting Range, 40μm Filtration Size - MS6-LFR-3/8-D7-E-R-M-VS, Numeric Part Number: 8232907

This filter regulator provides regulated compressed Air with integrated particulate removal for pneumatic systems. Designed for in-line or front-panel installation, it offers consistent output pressure and secondary exhaust capability while handling compressed Air and inert gases to the specified purity class. The unit operates within typical workshop temperature ranges and is suitable where moderate corrosion resistance and food-contact suitability (per supplementary material notes) are required.

Features and Benefits:

• 0.5 to 12 bar regulation range ensures controlled downstream pressure
• 4000 L/min nominal flow supports high-flow pneumatic demands
• 40μm filtration delivers particle removal with greater than 75% condensate separation
• Polycarbonate bowl with plastic guard allows visible condensate monitoring
• Manual rotating drain enables simple condensate evacuation

Applications

• Suitable for general compressed-air distribution lines
• Ideal for feeding pneumatic actuators and valves
• Used with inert gas supply systems requiring regulated pressure
• Can be used in food-sector installations following material notes
• Suitable for plant areas with moderate corrosion exposure

What port sizes are provided for pipe connections?

Both inlet and outlet pneumatic connections use G3/8 thread.

How is the condensate removed from the bowl?

The condensate is expelled via a manually operated, rotating drain.

What materials are used for the fluid-contact components?

The housing is die-cast aluminium, the bowl is Makrolon® polycarbonate, Seals and membrane are NBR, and internal plates use POM.

What pressure and temperature limits apply during operation?

The unit accepts up to 20 bar maximum operating pressure and operates between -10°C and 60°C.

How does the unit perform regarding flow and hysteresis?

It provides a standardised flow rate of 4000 L/min and a maximum pressure hysteresis of 0.25 bar.