Finned Tubular Heater, 370mm, 750 W, 230 V ac

Rectangular finned resistors on stainless steel shielded tube.
Designed to heat air or gas by natural or forced convection.
Used in heater fans and static batteries, dryers and drying tunnels.
Minimum recommended air speed is 2.5m / s.

The ACIM Jouanin flat bracket 750W strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth

Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC

Strip Heating Elements

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

For reasons of safety the heater block and/or heater sheath must be bonded to earth

UL Recognised; CSA Certified