NXP, 16bit ARM7TDMI-S, LPC21 Microcontroller, 60MHz, 256 kB Flash, 64-Pin LQFP
- RS庫存編號:
- 725-7755
- 製造零件編號:
- LPC2129FBD64/01,15
- 製造商:
- NXP
此圖片僅供參考,請參閲產品詳細資訊及規格
小計(1 件)*
HK$181.50
訂單超過 HK$250.00 免費送貨
- 286 件準備從其他地點送貨
單位 | 每單位 |
|---|---|
| 1 - 39 | HK$181.50 |
| 40 - 79 | HK$177.50 |
| 80 + | HK$173.70 |
* 參考價格
- RS庫存編號:
- 725-7755
- 製造零件編號:
- LPC2129FBD64/01,15
- 製造商:
- NXP
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | NXP | |
| Family Name | LPC21 | |
| Package Type | LQFP | |
| Mounting Type | Surface Mount | |
| Pin Count | 64 | |
| Device Core | ARM7TDMI-S | |
| Data Bus Width | 16 bit, 32bit | |
| Program Memory Size | 256 kB | |
| Maximum Frequency | 60MHz | |
| RAM Size | 16 kB | |
| USB Channels | 0 | |
| Number of PWM Units | 1 | |
| Number of SPI Channels | 2 | |
| Number of UART Channels | 1 | |
| Number of I2C Channels | 1 | |
| Typical Operating Supply Voltage | 1.65 → 1.95 V, 3 → 3.6 V | |
| Number of USART Channels | 0 | |
| Number of CAN Channels | 2 | |
| Number of ADC Units | 1 | |
| Length | 10.1mm | |
| ADCs | 4 x 10 bit | |
| Instruction Set Architecture | RISC | |
| Pulse Width Modulation | 1(6 Channel) (Motor Control) | |
| Width | 10.1mm | |
| Maximum Operating Temperature | +85 °C | |
| Dimensions | 10.1 x 10.1 x 1.45mm | |
| Program Memory Type | Flash | |
| Minimum Operating Temperature | -40 °C | |
| Number of PCI Channels | 0 | |
| Number of Ethernet Channels | 0 | |
| Number of LIN Channels | 0 | |
| Height | 1.45mm | |
| 選取全部 | ||
|---|---|---|
品牌 NXP | ||
Family Name LPC21 | ||
Package Type LQFP | ||
Mounting Type Surface Mount | ||
Pin Count 64 | ||
Device Core ARM7TDMI-S | ||
Data Bus Width 16 bit, 32bit | ||
Program Memory Size 256 kB | ||
Maximum Frequency 60MHz | ||
RAM Size 16 kB | ||
USB Channels 0 | ||
Number of PWM Units 1 | ||
Number of SPI Channels 2 | ||
Number of UART Channels 1 | ||
Number of I2C Channels 1 | ||
Typical Operating Supply Voltage 1.65 → 1.95 V, 3 → 3.6 V | ||
Number of USART Channels 0 | ||
Number of CAN Channels 2 | ||
Number of ADC Units 1 | ||
Length 10.1mm | ||
ADCs 4 x 10 bit | ||
Instruction Set Architecture RISC | ||
Pulse Width Modulation 1(6 Channel) (Motor Control) | ||
Width 10.1mm | ||
Maximum Operating Temperature +85 °C | ||
Dimensions 10.1 x 10.1 x 1.45mm | ||
Program Memory Type Flash | ||
Minimum Operating Temperature -40 °C | ||
Number of PCI Channels 0 | ||
Number of Ethernet Channels 0 | ||
Number of LIN Channels 0 | ||
Height 1.45mm | ||
- COO (Country of Origin):
- TW
ARM7 Family Microcontrollers, NXP
wide range of serial communications interfaces and on-chip SRAM options
Alternative 16-bit Thumb-mode reduces code by more than 30 % with minimal performance penalty
32 bit timers, PWM channels and up to 47 GPIO lines
Ideally suited to industrial control and medical systems
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Note
相关链接
- NXP LPC21 Microcontroller 256 kB Flash, 64-Pin LQFP
- NXP LPC21 Microcontroller 512 kB Flash, 64-Pin LQFP
- NXP LPC24 Microcontroller 208-Pin LQFP
- NXP LPC24 Microcontroller 512 kB Flash, 180-Pin TFBGA
- Microchip AT91 Microcontroller 256 kB Flash, 64-Pin LQFP
- Microchip PIC24E Microcontroller 256 kB Flash, 44-Pin TQFP
- DSPIC33EP256MC502-I/SO Microchip, 16bit Digital Signal Processor 60MHz 256 kB Flash 28-Pin SOIC
- NXP S12 Microcontroller 128 kB Flash, 144-Pin LQFP
