Fluke T5-1000 + 1AC-II Multifunction Tester
- RS庫存編號:
- 494-7650
- Distrelec 貨號:
- 176-79-160
- 製造零件編號:
- T5-H5-1AC KIT/EUR
- 製造商:
- Fluke
小計（1 件）*
HK$2,993.80
訂單超過 HK$250.00 免費送貨
有限的庫存
- 12 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | HK$2,993.80 |
* 參考價格
- RS庫存編號:
- 494-7650
- Distrelec 貨號:
- 176-79-160
- 製造零件編號:
- T5-H5-1AC KIT/EUR
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Multifunction Tester | |
| Automatic RCD Test | No | |
| Model Number | T5-1000 + 1AC-II | |
| RCD Ramp Test | No | |
| Maximum Voltage Measurement | 1000V ac | |
| Test Type | Continuity, SSR Isolated Flyback Converter, Resistance, MOSFET | |
| Earth Resistance Measurement | No | |
| Downloadable Data | No | |
| Battery Life | 360h | |
| Width | 51mm | |
| Standards/Approvals | EN 610101, VDE, CE, IEC 60529, CSA | |
| Height | 203mm | |
| Length | 30.5mm | |
| Weight | 380g | |
| Test Standards | EN 61326 | |
| IP Rating | IP52 | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000V | |
| Power Source | Battery | |
| Display Type | LED | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 50°C | |
| Battery Type | AA | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Multifunction Tester | ||
Automatic RCD Test No | ||
Model Number T5-1000 + 1AC-II | ||
RCD Ramp Test No | ||
Maximum Voltage Measurement 1000V ac | ||
Test Type Continuity, SSR Isolated Flyback Converter, Resistance, MOSFET | ||
Earth Resistance Measurement No | ||
Downloadable Data No | ||
Battery Life 360h | ||
Width 51mm | ||
Standards/Approvals EN 610101, VDE, CE, IEC 60529, CSA | ||
Height 203mm | ||
Length 30.5mm | ||
Weight 380g | ||
Test Standards EN 61326 | ||
IP Rating IP52 | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 1000V | ||
Power Source Battery | ||
Display Type LED | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 50°C | ||
Battery Type AA | ||
豁免
- COO (Country of Origin):
- US
Fluke Multifunction Tester, 1000V Maximum Voltage Measurement, 360h Battery Life - T5-H5-1AC KIT/EUR
This multifunction tester is a Compact diagnostic tool designed for electrical professionals to measure voltage, continuity, resistance and current in industrial and maintenance environments. It combines non-contact voltage detection with an in-line tester that presents readings on an LED display, supporting trouble-shooting across low- and high-voltage systems while remaining portable for on-site work.
Features & Benefits
• Measures up to 1000V AC for high-voltage verification
• OpenJaw current sensing enables up to 100 A without circuit interruption
• Resistance range to 1000 Ω for component and wiring checks
• Continuous self-test and Visual tip indicator for live-voltage detection
• IP52 ingress protection for use in dusty and light-moisture sites
• AA battery operation providing about 360 h runtime
• OpenJaw current sensing enables up to 100 A without circuit interruption
• Resistance range to 1000 Ω for component and wiring checks
• Continuous self-test and Visual tip indicator for live-voltage detection
• IP52 ingress protection for use in dusty and light-moisture sites
• AA battery operation providing about 360 h runtime
Applications
• Suitable for fault-finding on industrial control panels
• Ideal for commissioning power distribution and switchgear
• Used for verifying continuity and resistance in maintenance checks
• Can be used for non-contact detection of live conductors in wiring tasks
• Used with clamp-on measurements where circuit integrity must remain intact
• Ideal for commissioning power distribution and switchgear
• Used for verifying continuity and resistance in maintenance checks
• Can be used for non-contact detection of live conductors in wiring tasks
• Used with clamp-on measurements where circuit integrity must remain intact
What safety categories does it meet for live electrical work?
It is rated for CAT III and CAT IV environments at safety voltages up to 1000 V, matching common site-level protection standards.
How is current measured without breaking the circuit?
The tester uses an OpenJaw technique that clamps around a conductor to sense current up to 100 A while the circuit remains closed.
What form of data output or logging is available?
There is no downloadable data capability
readings are shown on the integrated LED display only.
What approvals and test standards are relevant for compliance checks?
The unit conforms to EN 61010-1, VDE, CE and meets EN 61326 test requirements along with IEC 60529 for ingress classification.
How robust is the tool for day-to-day site use?
It survives drops from 3M and weighs 380 g, offering a balance of portability and durability for routine field tasks.
Supplied with
Electrical tester, detachable 4 mm TP4 measuring tips, instructions (T5-H5-1AC kit [T5-1000] also includes H5 holster and 1AC voltage tester)
Optional accessories:
H5: Holster with belt loop for T5-600 / T5-1000 2921246
Optional accessories:
H5: Holster with belt loop for T5-600 / T5-1000 2921246