RS PRO Plug In Power Relay, 115V ac Coil, 10A Switching Current, 3PDT
- RS庫存編號:
- 349-282
- 製造商:
- RS PRO
- RS庫存編號:
- 349-282
- 製造商:
- RS PRO
產品概覽和技術數據資料表
法例與合規
不適用
- COO (Country of Origin):
- CN
產品詳細資訊
RS PRO Coil Non-Latching Relay, 3PDT, 10 A Switching Current, 115 V AC, Plug In, 3 Pole
To open and close electrical circuits, use this RS PRO fast-acting relay. The component is well-suited for powering push-buttons in industrial environments. For versatility, you can either mount it on a DIN rail or directly onto a PCB (printed circuit board).
A robust polycarbonate housing protects the relay against dirt, moisture and wear. Its silver contacts are gold-plated to increase durability and extend the life of the device.
As part of the RS PRO range, this product has been tested for safety and quality. This type of non-latching relay is commonly used for telecommunications and medical equipment.
A robust polycarbonate housing protects the relay against dirt, moisture and wear. Its silver contacts are gold-plated to increase durability and extend the life of the device.
As part of the RS PRO range, this product has been tested for safety and quality. This type of non-latching relay is commonly used for telecommunications and medical equipment.
Features and Benefits
- Coil power of 2.75 W
- Coil resistance of 2 kΩ
- Coil voltage of 115 V AC
- 3PDT (triple pole double throw) contact configuration
- Silver alloy contact material
- Depth and length of 35 mm
- Height of 56 mm
- Isolation coil to contact of 1.5 kV AC
- Mechanical life of 10 million cycles
- Operating temperature range of -45ºC to +55ºC
- Maximum switching power of 2.4 kVA (AC) and 300 W (DC)
- Maximum switching voltage of 240 V (AC) and 30 V (DC)
- Plug-in mounting type
- Three poles
- Meets CUR and UL (Underwriters' Laboratories) E125370 standards
- Switching current of 10 A
- Through-hole terminal type
Approvals
UL
規格
Attribute | Value |
|---|---|
| Coil Voltage | 115V ac |
| Contact Configuration | 3PDT |
| Mounting Type | Plug In |
| Switching Current | 10A |
| Number of Poles | 3 |
| Latching | No |
| Terminal Type | Through Hole |
| Maximum Switching Voltage AC | 240V ac |
| Maximum Switching Voltage DC | 30V dc |
| Length | 35mm |
| Coil Resistance | 2 kΩ |
| Coil Power | 2.75W |
| Life | 10000000 (Mechanical) cycles |
| Standards Met | CUR E125370, UL E125370 |
| Contact Material | Silver Alloy |
| Height | 56mm |
| Isolation Coil To Contact | 1.5kV ac |
| Depth | 35mm |
| Minimum Operating Temperature | -45°C |
| Maximum Operating Temperature | +55°C |
| Maximum Switching Power DC | 300 W |
| Maximum Switching Power AC | 2.4 kVA |
| Application | Power |