Block 18V ac 2 Output Through Hole PCB Transformer, 18VA
- RS庫存編號:
- 201-7280
- 製造零件編號:
- FL 18/18
- 製造商:
- Block
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
HK$161.70
庫存資訊目前無法查詢
單位 | 每單位 |
|---|---|
| 1 - 4 | HK$161.70 |
| 5 - 9 | HK$158.20 |
| 10 + | HK$154.70 |
* 參考價格
- RS庫存編號:
- 201-7280
- 製造零件編號:
- FL 18/18
- 製造商:
- Block
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Block | |
| Secondary Voltage Rating | 18V ac | |
| Power Rating | 18VA | |
| Primary Voltage Rating | 115V ac, 230V ac | |
| Number of Outputs | 2 | |
| Length | 68mm | |
| Width | 27.6mm | |
| Depth | 57mm | |
| Dimensions | 68 x 27.6 x 57mm | |
| Weight | 375g | |
| Mounting Type | Through Hole | |
| Maximum Temperature | +40°C | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| 選取全部 | ||
|---|---|---|
品牌 Block | ||
Secondary Voltage Rating 18V ac | ||
Power Rating 18VA | ||
Primary Voltage Rating 115V ac, 230V ac | ||
Number of Outputs 2 | ||
Length 68mm | ||
Width 27.6mm | ||
Depth 57mm | ||
Dimensions 68 x 27.6 x 57mm | ||
Weight 375g | ||
Mounting Type Through Hole | ||
Maximum Temperature +40°C | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
- COO (Country of Origin):
- DE
PCB Mounting Low Profile 115 / 230Vac Primary
Twin 115Va.c. 50 to 60Hz primary windings for series or parallel connection
Twin secondary windings for series or parallel connection
Low profile compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure board mounting
Standard: EN60742, VDE 0551, IEC 61558
Twin secondary windings for series or parallel connection
Low profile compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure board mounting
Standard: EN60742, VDE 0551, IEC 61558
Note
Transformer with 2 x 24V outputs are not VDE, SEV approved.
Standards
VD 61 558
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
相关链接
- Block 9V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 8V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 15V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 12V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 6V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 24V ac 2 Output Through Hole PCB Transformer, 18VA
- Myrra 18V ac 2 Output Through Hole PCB Transformer, 18VA
- Block 18V ac 2 Output Through Hole PCB Transformer, 6VA