Honeywell Technologies Pressure SensorBoard 8 DIP
- RS庫存編號:
- 211-9922
- 製造零件編號:
- HSCDRRN010MDAA3
- 製造商:
- Honeywell
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 盒，共 50 件）*
HK$23,591.90
訂單超過 HK$250.00 免費送貨
有庫存
- 50 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每盒* |
|---|---|---|
| 50 - 50 | HK$471.838 | HK$23,591.90 |
| 100 - 150 | HK$462.40 | HK$23,120.00 |
| 200 + | HK$453.152 | HK$22,657.60 |
* 參考價格
- RS庫存編號:
- 211-9922
- 製造零件編號:
- HSCDRRN010MDAA3
- 製造商:
- Honeywell
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Honeywell | |
| Product Type | Pressure Sensor | |
| Maximum Overload Pressure | 75kPa | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Mount Type | Board | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 1 kPa | |
| Maximum Supply Voltage | 5V | |
| Port Type | Dual Radial Barbed | |
| Accuracy | ±0.25 % | |
| Maximum Operating Temperature | +85°C | |
| Standards/Approvals | ISO 9001 | |
| Width | 13.3mm | |
| Series | HSC | |
| Length | 10mm | |
| Height | 13.75mm | |
| Minimum Operating Pressure | -10mbar | |
| Minimum Operating Temperature | -20°C | |
| Automotive Standard | ISO 9001 | |
| 選取全部 | ||
|---|---|---|
品牌 Honeywell | ||
Product Type Pressure Sensor | ||
Maximum Overload Pressure 75kPa | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Mount Type Board | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 1 kPa | ||
Maximum Supply Voltage 5V | ||
Port Type Dual Radial Barbed | ||
Accuracy ±0.25 % | ||
Maximum Operating Temperature +85°C | ||
Standards/Approvals ISO 9001 | ||
Width 13.3mm | ||
Series HSC | ||
Length 10mm | ||
Height 13.75mm | ||
Minimum Operating Pressure -10mbar | ||
Minimum Operating Temperature -20°C | ||
Automotive Standard ISO 9001 | ||
Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRN010MDAA3
This differential pressure sensor measures pressure difference between two ports and provides a ratiometric analogue or 14‑bit digital output for use with low‑voltage systems. It is intended for non‑corrosive, non‑ionic gases and is calibrated and temperature‑compensated for accurate readings across its compensated temperature range. The device is board‑mountable and available with dual radial barbed ports in a DIP package for straightforward PCB integration.
Features and Benefits:
• ±0.25%FSS accuracy reduces software correction needs
• Operates from 3.3V to 5V for low‑voltage designs
• Calibrated and compensated for temperature stability
• Fast update rate supporting up to 2kHz digital output
• High overload protection up to 75kPa improves robustness
• Operates from -20°C to 85°C for industrial conditions
• Operates from 3.3V to 5V for low‑voltage designs
• Calibrated and compensated for temperature stability
• Fast update rate supporting up to 2kHz digital output
• High overload protection up to 75kPa improves robustness
• Operates from -20°C to 85°C for industrial conditions
Applications
• Used for ventilator and respiratory flow monitoring
• Suitable for HVAC filter clog detection systems
• Ideal for gas flow instrumentation and calibration rigs
• Used with oxygen concentrators and anaesthesia machines
• Can be used for barometry and indoor Air quality monitoring
• Suitable for HVAC filter clog detection systems
• Ideal for gas flow instrumentation and calibration rigs
• Used with oxygen concentrators and anaesthesia machines
• Can be used for barometry and indoor Air quality monitoring
What media may be applied to the ports?
The sensor is for non‑corrosive, non‑ionic gases, liquid‑media options exist for Port1 only on selected ranges and require compatible, particulate‑free fluids.
How is the sensor protected during solder assembly?
It meets IPC/JEDEC J‑STD‑020E moisture sensitivity level 1 allowing standard reflow without lengthy pre‑bake when handled per floor‑life guidance.
What digital interfaces are available and what resolution do they provide?
Digital outputs include I²C or SPI‑compatible formats with a minimum 12‑bit sensor resolution and up to 14‑bit digital output.
How does the device behave after power‑up?
Start‑up time to data‑ready is typically 3 MS for digital versions and up to 5 MS for analogue versions.
What mechanical mounting and port arrangements are offered?
The board‑mount package supports DIP pin mounting and variants include dual radial barbed port options for simple tubing connection.
相关链接
- RS PRO Black Nylon Cable Gland 5mm Min IP68
- Schneider Electric Analogue DIN Rail Time Switch 250 V ac, 1-Channel
- Belden Cat6 Ethernet Cable Blue LSZH Sheath, 304m
- Prysmian 6491B Series Green/Yellow 2.5 mm² Hook Up Wire 100m
- https://hkcn.rs-online.com/web/p/coaxial-cable/2662163
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Digital, Relay
- ebm-papst 4400 F Series Axial Fan DC Operation 5.3W 119 x 119 x 25mm
- RS PRO 2 Core Power Cable 1000, 600 V