3M Silicon Carbide Sanding Disc, 125mm, Fine Grade, P120 Grit, 50 in pack
- RS庫存編號:
- 153-432
- 製造零件編號:
- 3M581C B61760
- 製造商:
- 3M
可享批量折扣
單價 毎批：50 个
HK$374.30
9 現貨庫存，可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 HK$850.00 即可享受 免費 送貨服務
Lot(s) | Per Lot | 每單位** |
|---|---|---|
| 1 - 5 | HK$374.30 | HK$7.486 |
| 6 + | HK$360.80 | HK$7.216 |
** 參考價格
- RS庫存編號:
- 153-432
- 製造零件編號:
- 3M581C B61760
- 製造商:
- 3M
豁免
3M™ 581C Fibre Disc
The 3M™ 581C fibre disc features high-performance Zironia aluminium abrasive grain that's on a fibre backing. The abrasive is resin bonded and close coated that offers great performance and a consistent quality finish. Suitable for a variety of general purpose metalworking applications from deburring and finishing.
Outstanding Cutting Performance
Scotch-Brite™ compressed discs with Roloc™ fixing system for flat work.
For all deburring operations on sharp edges and large burrs on contoured parts.
For carbon and stainless steels, non-ferrous metals (copper alloys, aluminium, etc.) and synthetic materials. For titanium, it is best to use silicone carbide discs (S).
For all deburring operations on sharp edges and large burrs on contoured parts.
For carbon and stainless steels, non-ferrous metals (copper alloys, aluminium, etc.) and synthetic materials. For titanium, it is best to use silicone carbide discs (S).
The 581C disc contains an impressive Zirona aluminium abrasive blend on fibre backed disc giving a great performance on an angle grinder. The disc is suitable for use on a range of metals from grinding and finishing weld seams on most metals.
Features and Benefits
• Good performance with consistent quality finish
• Alumina-zirconia abrasive on a fibre backing that’s closed-coated and resin bonded
• Ideal for grinding and finishing weld seams on all metals.
• For use with a 3M™ Right Angle Grinder, compatible with 3M faceplates: 115 mm - 337-3929, 127 mm - 387-4220.
• Alumina-zirconia abrasive on a fibre backing that’s closed-coated and resin bonded
• Ideal for grinding and finishing weld seams on all metals.
• For use with a 3M™ Right Angle Grinder, compatible with 3M faceplates: 115 mm - 337-3929, 127 mm - 387-4220.
Applications
These fibre discs are great for weld removals, grinding and blending large and small metal areas. This could occur in industries such as farm and construction, automotive, ship and boat building, metal fabrication.
Available in thie range
• 806-4807 is a 3M 581C 115mm P80 fibre cutting disc
• 806-4819 is a 3M 581C 115mm P60 fibre cutting disc
• 153-842 is a 3M 581C 115mm ENC P120 fibre cutting disc
• 153-482 is a 3M 581C 125mm ENC P24 fibre cutting disc
• 153-476 is a 3M 581C 125mm ENC P36 fibre cutting disc
• 153-460 is a 3M 581C 125mm ENC P60 fibre cutting disc
• 153-448 is a 3M 581C 125mm ENC P80 fibre cutting disc
• 153-432 is a 3M 581C 125mm ENC P120 fibre cutting disc
• 806-4819 is a 3M 581C 115mm P60 fibre cutting disc
• 153-842 is a 3M 581C 115mm ENC P120 fibre cutting disc
• 153-482 is a 3M 581C 125mm ENC P24 fibre cutting disc
• 153-476 is a 3M 581C 125mm ENC P36 fibre cutting disc
• 153-460 is a 3M 581C 125mm ENC P60 fibre cutting disc
• 153-448 is a 3M 581C 125mm ENC P80 fibre cutting disc
• 153-432 is a 3M 581C 125mm ENC P120 fibre cutting disc
Would you be able to use these discs on wood?
No, these are not recommended to be used on wood, just metals.
Why choose 3M?
3M is a leading innovator of abrasive technologies, constantly evolving to provide ideal solutions to industrial and commercial applications. With 3M you can be assured of a wide selection of quality products.
Attribute | Value |
|---|---|
| Disc Type | Sanding Disc |
| Disc Diameter | 125mm |
| Abrasive Material | Silicon Carbide |
| Bore Size | 22mm |
| Grit Size | P120 |
| Number in Pack | 50 |
| Grade | Fine |
| Maximum Safe Speed | 12000rpm |