3M Filter for use with 3M 6000 Series Respirator 6055

The 3M™ 6055 (A2) is a filter pack, which is designed for use with the 6000/7500 series half face respirators and 6000/7000 series full face respirators. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of A1, it can protect you against organic gases. The bayonet fitting types allows each filter to be clicked in place for ease.

Gas and Vapour Filter 6055 offers A2 protection against organic vapours (boiling point above 65%)
Lightweight, low breathing resistance, well balanced when fitted to mask
Provides excellent field of vision as a result of the unique trapezoidal shape
Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system
Bayonet fitting allows filters to be clicked into place for ease of fitting

• Vehicle manufacture

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

3M is a leading innovator of abrasive technologies, constantly evolving to provide ideal solutions to industrial and commercial applications. With 3M you can be assured of a wide selection of quality products.

EN14387: 2004; Compliant with A2 EN141:2000.

This respirator filter is designed to protect against organic vapours, making it an essential part of respiratory protection gear. It works with 3M half and full face respirators, ensuring safety during tasks involving harmful substances. The filter's durable construction and secure bayonet connection provide user confidence across various industrial environments.

• Activated carbon technology facilitates effective gas filtration
• Low-profile design enhances comfort and balance during use
• Offers protection from organic vapours with boiling points greater than 65°C
• Lightweight at 70g per pair, allowing for extended wear
• Compatible with various models in the 3M respirator range

• Used for cleaning with organic solvents such as toluene and MEK
• Suitable for painting tasks, whether using a brush or roller
• Ideal for involving pesticide and paint spraying
• Employed during degreasing, mixing, and applying paint thinners

These filters fit 3M 6000/6500QL/7500 Series half face respirators and 6000/FF-400 Series full face respirators.

Dispose of the filters in accordance with local regulations regarding the contaminants they have captured to ensure safe disposal practices.

Store the filters in a cool, dry place, ideally between –20°C and +25°C, with relative humidity kept below 80%.

Filters should be replaced at least every six months after opening, regardless of usage frequency, to maintain effectiveness.

EN14387: 2004; Compliant with A2 EN141:2000.