SKF Nitrile Rubber (NBR) Radial Shaft Seal, 12 mm ID, 24 mm OD, 7 mm
- RS庫存編號:
- 266-8869
- 製造零件編號:
- 12X24X7 HMSA10 RG
- 製造商:
- SKF
小計（1 包，共 10 件）*
HK$105.90
訂單超過 HK$250.00 免費送貨
有庫存
- 10 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 + | HK$10.59 | HK$105.90 |
* 參考價格
- RS庫存編號:
- 266-8869
- 製造零件編號:
- 12X24X7 HMSA10 RG
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 12mm | |
| Outside Diameter | 24mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 12mm | ||
Outside Diameter 24mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 12mm Inside Diameter, 24mm Outside Diameter - 12X24X7 HMSA10 RG
This radial shaft seal provides a sealing Interface for rotary shafts in machinery, designed to prevent lubricant leakage and exclude contaminants during rotation. It is composed of a synthetic elastomer and is intended for use where a compact, rotary sealing element is required.
Features and Benefits:
• Constructed from nitrile rubber to resist common oils and greases
• Designed for rotary shaft applications to maintain dynamic sealing integrity
• 7 mm cross-section thickness for consistent radial contact
• Inner surface engineered to SIT on 12 mm shaft diameters for accurate fit
• Outer contour sized to fit 24 mm housing bores for secure retention
• Designed for rotary shaft applications to maintain dynamic sealing integrity
• 7 mm cross-section thickness for consistent radial contact
• Inner surface engineered to SIT on 12 mm shaft diameters for accurate fit
• Outer contour sized to fit 24 mm housing bores for secure retention
Applications
• Suitable for small motor shaft sealing and lubrication retention
• Used with gearbox outputs requiring Compact rotary Seals
• Ideal for replacement in bearings with matching bore and shaft sizes
• Can be used for light-duty pumps needing oil containment
• Used with gearbox outputs requiring Compact rotary Seals
• Ideal for replacement in bearings with matching bore and shaft sizes
• Can be used for light-duty pumps needing oil containment
What material properties affect chemical compatibility?
The elastomer is nitrile rubber which offers resistance to many oils and greases but may be affected by certain solvents and high‑aromatic fuels.
How should the part be located in the housing for correct operation?
It should be pressed so the outer diameter seats evenly within the bore and the sealing lip aligns concentrically with the rotating shaft.
What installation clearances are critical for performance?
A snug interference fit on the shaft and a firm press fit in the bore are required to maintain sealing and prevent extrusion.
How does the seal accommodate shaft misalignment or runout?
The flexible elastomer lip tolerates small radial runout and misalignment while preserving contact with the shaft.
相关链接
- SKF Nitrile Rubber (NBR) Seal 22 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 75 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 42 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal 50 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 47 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 80 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 80 mm OD, 8 mm