透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	SKF
	Number of Teeth	36
	Product Type	Sprocket
	Bore Diameter	63mm
	Bore Type	Rough Stock Bore
	Pitch Diameter	182.15mm
	Hub Diameter	100mm
	Material	Steel
	Sprocket Width	35mm
	Acceptable Chain Type	12 B-2
	Maximum Inside Diameter	63mm
	Standards/Approvals	EN, BS

	選取全部
	品牌 SKF
	Number of Teeth 36
	Product Type Sprocket
	Bore Diameter 63mm
	Bore Type Rough Stock Bore
	Pitch Diameter 182.15mm
	Hub Diameter 100mm
	Material Steel
	Sprocket Width 35mm
	Acceptable Chain Type 12 B-2
	Maximum Inside Diameter 63mm
	Standards/Approvals EN, BS

Datasheet - PHS 10B-1B36

登入下載 CAD 模型

COO (Country of Origin):: CN

SKF Sprocket, 36 Teeth, 182.15mm Pitch Diameter - PHS 10B-1B36

This sprocket is a steel transmission component designed to transfer rotary motion between chain and shaft in industrial equipment. It is manufactured with a rough-stock bore for on-site finishing and conforms to recognised EN and BS standards to suit heavy-duty installations.

Features and Benefits:

• 36-tooth profile for consistent chain engagement and load sharing
• 35mm width for sustained contact in high-load scenarios
• 182.15mm pitch diameter for precise chain alignment
• 100mm hub diameter to accommodate robust mounting arrangements
• Maximum inside diameter 63mm allowing for larger bore final machining
• Compatible with 12B-2 chain to ensure interchangeability with existing drives

Applications

• Suitable for replacement sprocket 36T 35mm width in conveyors
• Ideal for drive trains using 12 B-2 chain in manufacturing
• Used with industrial gearboxes requiring EN BS approved components
• Can be used for heavy machinery requiring 35mm wide sprockets
• Used for refurbishment where rough-stock bore sprocket requires machining

How is the bore prepared for final shaft fitting?

The bore is supplied in rough-stock form to allow finishing to the EXACT shaft tolerance during installation.

Which chain specification will mesh correctly with this component?

It is designed for 12B-2 chain engagement to match standard roller chain geometries.

What material properties are relevant for load capacity considerations?

The component is fabricated from steel to provide the necessary strength for industrial drive loads.

How does the hub geometry affect assembly options?

The 100mm hub diameter offers a substantial section for keyways, taper bushes, or bolted attachments as required.

What limitation does the maximum inside diameter impose on final machining?

The 63mm maximum inside diameter defines the largest achievable finished bore prior to any additional counterbore or rework.

SKF 36 Tooth Rough Stock Bore Sprocket, PHS 10B-1B36 12 B-2

訂單超過 HK$250.00 免費送貨