P.M.A KS Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

RS庫存編號:: 736-4871
製造零件編號:: KS50-100-0000D-000
製造商:: P.M.A

P.M.A KS Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

HK$5,579.93

訂單超過 HK$250.00 免費送貨

暫時缺貨

從 2026年3月30日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$5,579.93

* 參考價格

RS庫存編號:: 736-4871
製造零件編號:: KS50-100-0000D-000
製造商:: P.M.A

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	P.M.A
	Product Type	PID Temperature Controller
	Output Type	Relay
	Number of Outputs	2
	Maximum Operating Temperature	65°C
	Minimum Operating Temperature	-20°C
	Control Type	On-Off
	Maximum Supply Voltage	260V ac
	Auxiliary Power Supply	22 mA, 18 V
	Digital Comms	RS422/RS485/Modbus RTU
	Diagnostics	Alarm, Error List, Maintenance Manager and Error List
	Maximum Voltage	250V ac
	Display Type	Multi Line, LED
	Width	96 mm
	Length	118mm
	Standards/Approvals	EN 61326-1, cULus, EN 61010-1, EN 14597
	IP Rating	IP00, IP20, IP65
	Series	KS
	Mount Type	Panel
	Input Type	RTD, Universal Thermocouple
	Panel Depth	118mm

	選取全部
	品牌 P.M.A
	Product Type PID Temperature Controller
	Output Type Relay
	Number of Outputs 2
	Maximum Operating Temperature 65°C
	Minimum Operating Temperature -20°C
	Control Type On-Off
	Maximum Supply Voltage 260V ac
	Auxiliary Power Supply 22 mA, 18 V
	Digital Comms RS422/RS485/Modbus RTU
	Diagnostics Alarm, Error List, Maintenance Manager and Error List
	Maximum Voltage 250V ac
	Display Type Multi Line, LED
	Width 96 mm
	Length 118mm
	Standards/Approvals EN 61326-1, cULus, EN 61010-1, EN 14597
	IP Rating IP00, IP20, IP65
	Series KS
	Mount Type Panel
	Input Type RTD, Universal Thermocouple
	Panel Depth 118mm

不適用

COO (Country of Origin):: DE

PMA KS 50-1 Temperature Controller

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.

• Universal continuous/switching version, i.e. reduced stocks

• 100ms cycle time, i.e. also suitable for fast control loops

• 20ms as shortest pulse for very fast / strong actuators

• Freely configurable analog output, e.g. as process value output

• Customer-specific linearisation for all sensors

• Settings can be blocked via password and internal switch for high security

• Extended temperature range up to 60 °C allows mounting close to the process

• Easy 2-point or offset measurement correction

• Emergency operation after sensor break by means of the "output hold" function

• Logical combination of digital outputs, e.g. for general alarm

• Programmer with 10 segments and "end" signal

• RS 422/485 Modbus RTU interface

• Built-in transmitter power supply

• Splash-water proof front (IP65)

PMA Temperature Controllers

Supplied with

German Manual

P.M.A KS Panel PID Temperature Controller, 2 Output Relay 260V ac On-Off

訂單超過 HK$250.00 免費送貨

PMA KS 50-1 Temperature Controller

PMA Temperature Controllers

Supplied with

相关链接