STAHLWILLE Digital Torque Wrench, 20 → 200Nm, 1/2 in Drive, Square Drive, 14 x 18mm Insert
- RS庫存編號:
- 127-6641
- 製造零件編號:
- 96501820
- 製造商:
- STAHLWILLE
當前暫無庫存,可於2024/8/1發貨,3 工作日送達。
單價 个
HK$8,589.84
單位 | 每單位 |
---|---|
1 + | HK$8,589.84 |
- RS庫存編號:
- 127-6641
- 製造零件編號:
- 96501820
- 製造商:
- STAHLWILLE
不適用
- COO (Country of Origin):
- DE
Manoskop® 730DR Electromechanical Torque Wrench
The Manoskop® 730DR electromechanical torque wrench serves to measure torques during the controlled tightening and loosening of threaded connections in the workshop sector. An appropriate socket tool must be connected to the torque wrench.
Type
96501810: 10-100 Nm electro-mechanical torque wrench with reversible 1/2" ratchet insert tool
96501820: 20-200 Nm electro-mechanical torque wrench with reversible 1/2" ratchet insert tool
96501840: 40-400 Nm electro-mechanical torque wrench with reversible 3/4" ratchet insert tool
Features and Benefits
Indicating (Type I) and click-type (Type II)
Tactile and acoustic trigger signal
QuickRelease safety lock
Fast setting using convenient keypad
Automatic compensation to achieve correct tightening torque even if a changed extension is entered
Overload protection with acoustic and visual signals
Automatic keypad lock prevents inadvertent changes
Angle-controlled measurements without a reference arm using Angle Module No 7395-1
Display also works for anti clockwise torque
Units of measurement: Nm, ftlb, inlb
Different tolerance limits can be set for each joint
Visual red and green signals in the display confirm the status of the joint
More security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code
Up to 7500 measurements can be stored
USB interface
Automatic notification of the next calibration date
Two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
Supplied in sturdy plastic case (40-100 in steel case)
Display deviation value ± 2%, ± 1 digit
Tactile and acoustic trigger signal
QuickRelease safety lock
Fast setting using convenient keypad
Automatic compensation to achieve correct tightening torque even if a changed extension is entered
Overload protection with acoustic and visual signals
Automatic keypad lock prevents inadvertent changes
Angle-controlled measurements without a reference arm using Angle Module No 7395-1
Display also works for anti clockwise torque
Units of measurement: Nm, ftlb, inlb
Different tolerance limits can be set for each joint
Visual red and green signals in the display confirm the status of the joint
More security for presets (function mode, trigger or preset value, unit of measurement, tolerance, save, deviating extension) using PIN code
Up to 7500 measurements can be stored
USB interface
Automatic notification of the next calibration date
Two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
Supplied in sturdy plastic case (40-100 in steel case)
Display deviation value ± 2%, ± 1 digit
Attribute | Value |
---|---|
Torque Wrench Type | Digital Torque Wrench |
Torque Range | 20 → 200Nm |
Drive Shape | Square |
Drive Size | 1/2 in |
Overall Length | 548 mm |
Insert Size | 14 x 18mm |
Accuracy | ±1 (Angle) %, ±2 (Torque) % |
Scale Graduations | 0.1 Nm, 0.5 Nm |