onsemi NB7NPQ1002MMTTWG, USB Controller, 2-Channel 10 Gbps, 3.6 V, USB 3.1, 3.3 V, 30-Pin WQFN
- RS庫存編號:
- 195-2479
- 製造零件編號:
- NB7NPQ1002MMTTWG
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 195-2479
- 製造零件編號:
- NB7NPQ1002MMTTWG
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Product Type | USB Controller | |
| Maximum Data Rate | 10Gbps | |
| Number of Transceivers | 2 | |
| USB Specification | USB 3.1 | |
| Sub Type | Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | WQFN | |
| Pin Count | 30 | |
| Supported Protocols | USB 3.1 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Length | 4.6mm | |
| Height | 0.75mm | |
| Series | NB7NPQ1002M | |
| Width | 2.6 mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Product Type USB Controller | ||
Maximum Data Rate 10Gbps | ||
Number of Transceivers 2 | ||
USB Specification USB 3.1 | ||
Sub Type Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 3.6V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type WQFN | ||
Pin Count 30 | ||
Supported Protocols USB 3.1 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Length 4.6mm | ||
Height 0.75mm | ||
Series NB7NPQ1002M | ||
Width 2.6 mm | ||
Automotive Standard No | ||
The NB7NPQ1002M is a high performance single−Port linear redriver designed for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7NPQ1002M compensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The NB7NPQ1002M offers programmable equalization and flat gain to optimize performance over various physical mediums. The NB7NPQ1002M contains an automatic receiver detect function which will determine whether the output is active. The receiver detection loop will be active if the corresponding channel’s signal detector is idle for a period of time. The channel will then move to Unplug Mode if a load is not detected, or it will return to Low Power Mode (Slumber mode) due to inactivity. Both the channels are independent with individual controls.