Megger MIT220 Insulation & Continuity Tester, 250V Min, 500V dc Max, 999MΩ Max, CAT III 300V
- RS庫存編號:
- 535-3185
- 製造零件編號:
- MIT220-EN
- 製造商:
- Megger
查看所有Insulation Testers
- RS庫存編號:
- 535-3185
- 製造零件編號:
- MIT220-EN
- 製造商:
- Megger
不適用
- COO (Country of Origin):
- GB
法例與合規
不適用
- COO (Country of Origin):
- GB
產品詳細資訊
Megger Insulation and Continuity Tester
The Megger 1000Mohm insulation and continuity tester incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.
Supplied with
6 x AA alkaline batteries, test leads crocodile clips, carry case and instructions.
Supplied with
6 x AA alkaline batteries, test leads crocodile clips, carry case and instructions.
Features and Benefits
250V to 500V test voltage
Dual and triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition and to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohm resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches on when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Auto ranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation and continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing auto power down after 5 minutes
Operating temperature ranges between -10°C and 55°C
Dual and triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition and to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohm resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches on when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Auto ranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation and continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing auto power down after 5 minutes
Operating temperature ranges between -10°C and 55°C
Applications
Domestic sites
Commercial sites
Industrial sites
Commercial sites
Industrial sites
Certifications
BS7671
BS76713-02
BS76713-03
BS76713-04
BS76713-06
BS76713-08
BS76413-04-04
EN61557-1
IEC 1010-1
IP40 rated
BS76713-02
BS76713-03
BS76713-04
BS76713-06
BS76713-08
BS76413-04-04
EN61557-1
IEC 1010-1
IP40 rated
規格
Attribute | Value |
Tester Type | Insulation & Continuity Tester |
Minimum Test Voltage | 250V |
Maximum Test Voltage | 500V dc |
Maximum Insulation Resistance Measurement | 999MΩ |
Display Type | LCD |
Test Current | 200mA |
Battery Life | 3000 5-Second Tests |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +55°C |
Power Source | Battery |
Safety Category Level | CAT III |
Safety Category Voltage | 300V |
Safety Category | CAT III 300V |
Weight | 530g |
Length | 195mm |
Battery Type | AA |
Model Number p | MIT220 |
Height | 40mm |
Dimensions | 195 x 98 x 40mm |
Width | 98mm |