The Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings. All of these probes are maintenance-free and have an external LED switch status indication.
Features and Benefits
The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC Process fitting material is thread G1 PN25, DIN3852-A
Easy setup without adjustment Product-independent switching point Rugged sensor construction Insensitive to build-up and statically charged products Solid densities from 8g/l reliably detected maintenance-free and does not wear out easily External LED switch Housing material PBT (plastic) Density is greater than 100g/l Breaking capacity maximum 750VA, 54W
Applications
Typical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides Almost all the bulk solids applications
