小計（1 件）*
HK$201.30
訂單超過 HK$250.00 免費送貨
有庫存
- 77 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | HK$201.30 |
* 參考價格
- RS庫存編號:
- 488-4981
- 製造零件編號:
- TW-04-12
- 製造商:
- Igus
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Igus | |
| Series | drylin T | |
| Product Type | Linear Guide Carriage | |
| Carriage Length | 34mm | |
| Carriage Width | 27mm | |
| Static Load Rating | 0.96kN | |
| Carriage Type | Linear | |
| Carriage Material | Die Cast Zinc | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Igus | ||
Series drylin T | ||
Product Type Linear Guide Carriage | ||
Carriage Length 34mm | ||
Carriage Width 27mm | ||
Static Load Rating 0.96kN | ||
Carriage Type Linear | ||
Carriage Material Die Cast Zinc | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- DE
Igus DryLin T Series Linear Guide Carriage, 0.96kN Static Load Rating, Die Cast Zinc Carriage - TW-04-12
This linear guide carriage provides compact guided motion for automation and mechanical assemblies. It is designed as a small, robust sliding component suitable for integration into linear motion systems where low-friction guidance and a lightweight carriage are required.
Features and Benefits:
• Static load capacity 0.96 kN delivers predictable load handling
• Die-cast zinc body offers sturdy construction and reduced weight
• 34mm carriage length allows compact linear integration
• 27mm carriage width enables narrow-profile installations
• Linear carriage form factor supports smooth guidance in systems
• Die-cast zinc body offers sturdy construction and reduced weight
• 34mm carriage length allows compact linear integration
• 27mm carriage width enables narrow-profile installations
• Linear carriage form factor supports smooth guidance in systems
Applications
• Suitable for compact gantry stages in automation systems
• Ideal for pick-and-place equipment in electronics assembly
• Used with conveyor transfer modules for part positioning
• Can be used for actuator-mounted sliding supports in machinery
• Ideal for pick-and-place equipment in electronics assembly
• Used with conveyor transfer modules for part positioning
• Can be used for actuator-mounted sliding supports in machinery
What construction material influences wear characteristics?
The main body is die-cast zinc, which provides dimensional stability and consistent surface properties affecting wear rates under sliding conditions.
How should I assess load capability for my design?
Use the static load rating of 0.96 kN to determine maximum unsupported load
dynamic factors and safety margins must be calculated separately for moving applications.
Which form-factor constraints affect mounting choices?
The carriage measures 34mm along its length and 27mm across its width, so mounting brackets and sliding rails should match these compact dimensions for correct alignment.
Is this component suitable as a direct replacement in existing assemblies?
It can serve as a replacement when the dimensional envelope and static load requirements match your original part
verify interface compatibility before installation.
相关链接
- Igus Linear Guide Carriage TW-04-09 drylin T Series
- Igus Linear Guide Carriage TW-04-15 drylin T Series
- Igus Linear Guide Carriage TW-01-20 drylin T Series
- Igus Linear Guide Carriage TW-01-25 drylin T Series
- Igus Linear Guide Carriage TW-01-15 drylin T Series
- Igus Linear Guide Carriage TW-12-30 drylin T Series
- Igus Linear Guide Carriage TW-12-15 drylin T Series
- Igus Linear Guide Carriage TW-12-20 drylin T Series