Vishay IRF Type N-Channel MOSFET, 10 A, 400 V Enhancement, 3-Pin TO-220 IRF740PBF
- RS庫存編號:
- 178-0812
- 製造零件編號:
- IRF740PBF
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 管，共 50 件）*
HK$486.00
訂單超過 HK$250.00 免費送貨
有庫存
- 加上 750 件從 2026年6月15日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 50 - 200 | HK$9.72 | HK$486.00 |
| 250 + | HK$8.748 | HK$437.40 |
* 參考價格
- RS庫存編號:
- 178-0812
- 製造零件編號:
- IRF740PBF
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Channel Type | Type N | |
| Product Type | MOSFET | |
| Maximum Continuous Drain Current Id | 10A | |
| Maximum Drain Source Voltage Vds | 400V | |
| Package Type | TO-220 | |
| Series | IRF | |
| Mount Type | Through Hole | |
| Pin Count | 3 | |
| Maximum Drain Source Resistance Rds | 550mΩ | |
| Channel Mode | Enhancement | |
| Typical Gate Charge Qg @ Vgs | 63nC | |
| Forward Voltage Vf | 2V | |
| Maximum Power Dissipation Pd | 125W | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Length | 10.41mm | |
| Height | 9.01mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Channel Type Type N | ||
Product Type MOSFET | ||
Maximum Continuous Drain Current Id 10A | ||
Maximum Drain Source Voltage Vds 400V | ||
Package Type TO-220 | ||
Series IRF | ||
Mount Type Through Hole | ||
Pin Count 3 | ||
Maximum Drain Source Resistance Rds 550mΩ | ||
Channel Mode Enhancement | ||
Typical Gate Charge Qg @ Vgs 63nC | ||
Forward Voltage Vf 2V | ||
Maximum Power Dissipation Pd 125W | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Length 10.41mm | ||
Height 9.01mm | ||
Automotive Standard No | ||
Vishay IRF740 Series Power MOSFET, 400V Drain Source Voltage, 10A Continuous Drain Current - IRF740PBF
This power MOSFET is a high-voltage N-channel enhancement device designed for use in industrial switching and power-control circuits. It operates across a wide temperature range and is supplied in a through-hole TO-220AB package suitable for assemblies where robust mounting and straightforward heat-sinking are required. The device is intended for applications demanding sustained current handling and elevated voltage tolerance.
Features and Benefits:
• 400V drain-source rating for high-voltage switching applications • 10A continuous drain current to support moderate power loads • 125W power dissipation for reliable thermal performance • 550mΩ RDS(on) enabling efficient conduction in switching roles • 63nC typical gate charge to inform drive requirements • 20V maximum gate-source voltage for gate-drive margin
Applications
• Suitable for switch-mode power supply primary switching • Ideal for motor-control inverter stages in automation systems • Used for high-voltage power converters in industrial equipment • Can be used for power management in test and measurement rigs
What mounting method does the device require for heat management?
It is a through-hole component in a TO-220AB package, allowing direct attachment to heatsinks using a fastener and insulating hardware if required.
What temperature extremes can it tolerate during operation?
The device is specified to operate down to -55°C and up to 150°C, making it suitable for a wide range of environmental conditions.
What should be considered when designing the gate drive?
The maximum gate-source voltage is 20V and the typical gate charge is 63nC at VGS, so the driver must supply sufficient charge and respect the 20V limit to avoid gate overstress.
Is the device compliant with common environmental material standards?
The component conforms to RoHS directives on restricted hazardous substances.