Electromen - EM-346 BLDC MOTOR CONTROLLER, 12-35 V DC, 10 A

The EM-346 is brushless DC-motor drive for motors with hall sensor feedback.The drive has a MOSFET power stage which provides high efficiency and emits very low RF noise making is suitable for sensitive environments.

The driver can be used with 120° commutation. This driver has true 4Q power stage, and it makes possible to use regenerative braking.

In this braking method the supply voltage rises, this voltage rising can be controlled with braking resistor.

If uses battery supply then the braking energy can be leaded back to battery and braking resistor will not needed.

The unit accepts digital and analogue (0-5V or 0-10V) command inputs to control speed and direction, analogue providing proportional control if required

EM-346 has two NPN outputs for fault and overcurrent indication use. Some input and output functions can be modified with parameters.

Driver includes overvoltage, undervoltage and overtemperature protection and an on board LED can indicate status and fault conditions

There are open and closed loop modes - open loop (direct control) sets the motor voltage proportional to the control voltage and closed loop mode uses hall sensor feedback for more accurate speed control

Start and stop ramp settings are available in both these modes as well as parameters to control speed range, closed loop rpm range

The analogue input is filtered to allow it to accept a PWM signal direct to control speed directly from a PLC

For parameter setting there is 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone

Features and Benefits

12-48Vdc, 10A continuous, 20-25A peak

Open & closed loop control operation with hall sensor feedback

Speed, direction, current limiting, soft start/stop and regenerative braking control

Compact and DIN rail mountable

Symmetrical control (rev-stop-fwd) can be achieved with EM-A1 card option;Three phase output

Speed and torque control

Open/closed loop modes

Regenerative braking with braking resistor output

Current limit and trip settings

Symmetrical control (rev-stop-fwd) option

Fault and overcurrent outputs

Highly efficient with very low EMC emissions

DIN rail mountable

選取全部	屬性	值
	品牌	Electromen OY
	Number of Phases	3
	Product Type	DC Motor Controller
	Control Function	PWM
	Output Voltage	35 V
	Supply Voltage	11/35 V dc
	Current Rating	10 A
	Overall Length	72mm
	Overall Width	32mm
	Overall Depth	18 mm
	Maximum Operating Temperature	90°C
	Standards/Approvals	EN - 55022B

	選取全部
	品牌 Electromen OY
	Number of Phases 3
	Product Type DC Motor Controller
	Control Function PWM
	Output Voltage 35 V
	Supply Voltage 11/35 V dc
	Current Rating 10 A
	Overall Length 72mm
	Overall Width 32mm
	Overall Depth 18 mm
	Maximum Operating Temperature 90°C
	Standards/Approvals EN - 55022B

Electromen OY DC Motor Controller, 11/35 V dc, 3 Phase, 10 A, PWM Function

訂單超過 HK$250.00 免費送貨

Electromen - EM-346 BLDC MOTOR CONTROLLER, 12-35 V DC, 10 A

Features and Benefits

相关链接