Gossen Metrawatt PROFiTEST PRIME Multifunction Tester 50V With USB

RS庫存編號:: 260-8278
製造零件編號:: M516G
製造商:: Gossen Metrawatt

Gossen Metrawatt PROFiTEST PRIME Multifunction Tester 50V With USB

小計（1 件）*

HK$73,558.40

訂單超過 HK$250.00 免費送貨

有庫存

加上 1 件從 2026年11月09日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$73,558.40

* 參考價格

RS庫存編號:: 260-8278
製造零件編號:: M516G
製造商:: Gossen Metrawatt

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Gossen Metrawatt
	Product Type	Multifunction Tester
	Loop Impedance Test Type	2 Wire, 3 Wire
	Automatic RCD Test	Yes
	Model Number	PROFiTEST PRIME
	RCD Ramp Test	Yes
	Non-Tripping	Yes
	Insulation Test Voltage	50V
	Maximum Voltage Measurement	230V
	Earth Resistance Measurement	No
	Downloadable Data	No
	Interface Type	USB
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Standards/Approvals	EN 501101, IEC 603646, RoHS
	Remote Switch Mode	Yes
	Weight	10.15kg
	Test Standards	DIN VDE 0100-600, EN 61010
	IP Rating	IP40
	Power Source	Battery
	Safety Category Level	CAT IV, CAT III
	Safety Category Voltage	300V
	Battery Type	Rechargeable
	Maximum Operating Temperature	+50°C
	Minimum Operating Temperature	+5°C

	選取全部
	品牌 Gossen Metrawatt
	Product Type Multifunction Tester
	Loop Impedance Test Type 2 Wire, 3 Wire
	Automatic RCD Test Yes
	Model Number PROFiTEST PRIME
	RCD Ramp Test Yes
	Non-Tripping Yes
	Insulation Test Voltage 50V
	Maximum Voltage Measurement 230V
	Earth Resistance Measurement No
	Downloadable Data No
	Interface Type USB
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Standards/Approvals EN 501101, IEC 603646, RoHS
	Remote Switch Mode Yes
	Weight 10.15kg
	Test Standards DIN VDE 0100-600, EN 61010
	IP Rating IP40
	Power Source Battery
	Safety Category Level CAT IV, CAT III
	Safety Category Voltage 300V
	Battery Type Rechargeable
	Maximum Operating Temperature +50°C
	Minimum Operating Temperature +5°C

COO (Country of Origin):: DE

Gossen-Metrawatt Multifunction Tester, 230V Maximum Voltage Measurement, 50V Insulation Test Voltage - M516G

This multifunction tester is a portable, battery-operated instrument designed for comprehensive electrical installation verification and protection device assessment. It combines loop impedance, RCD testing and insulation/continuity checks for field technicians. The unit operates within a wide ambient range and connects to external tools via a USB interface.

Features and Benefits:

• *Made in Germany
• CAT IV/CAT III electrical tester for high-safety site testing
• Loop impedance 2-wire/3-wire tester enabling versatile circuit checks
• RCD Type A ramp test multifunction tester for sensitive device evaluation
• Non-tripping continuity tester 1.6 mA reduces nuisance tripping during faults
• Rechargeable insulation/continuity tester 50 V allowing repeated field use

Applications

• Suitable for on-site periodic electrical installation verification
• Used for commissioning protective devices in distribution boards
• Ideal for testing RCDs requiring ramp and automatic sequences
• Can be used for continuity checks without causing circuit trips
• Used with portable setups where USB data transfer is required

What safety category and voltage rating does it support?

It is rated for CAT IV and CAT III use and supports measurements up to 300 V safety-category voltage.

How does the unit perform RCD testing automatically?

It executes automatic RCD tests including ramp profiles for Type A devices and supports remote switch control during test sequences.

What environmental conditions allow reliable operation?

The instrument is specified to operate between +5 °C and +50 °C and has an ingress protection rating of IP40.

How is data transferred from the device?

Data can be extracted using the built-in USB Interface for connection to compatible systems.

What are the power and portability characteristics?

It runs from a rechargeable battery, is battery-powered for field use and weighs 10.15 kg.