RS PRO IDM93N Handheld Digital Multimeter, 10A ac Max, 10A dc Max, 600V ac Max
- RS庫存編號:
- 123-3245
- Distrelec 貨號:
- 304-05-204
- 製造商:
- RS PRO
可享批量折扣
單價 个
HK$1,346.20
531 現貨庫存，可於3工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 HK$850.00 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 - 4 | HK$1,346.20 |
| 5 + | HK$1,107.90 |
- RS庫存編號:
- 123-3245
- Distrelec 貨號:
- 304-05-204
- 製造商:
- RS PRO
RS PRO IDM93N Rugged Industrial Digital Multimeter
RS Pro IDM93N digital multimeter designed for harsh environments. This is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The rugged body guarantees drop prof resistance from up to 1.5 m. Featuring fuse protection on both 200 mA and 10 A current ranges.
The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.
RS Pro IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.
This device has been designed for the most demanding users that value solid construction and highly accurate measurements.
RS Pro has a range of digital multimeters which are great value for money and are also a high quality that you can rely on.
Features and Benefits:
• 3 1/2 digit 0.8” large scale LCD
• 0.5 % basic DCV accuracy
• 0.5 % basic DCV accuracy
• 1.0 % basic DCA accuracy
• 1.5 % basic ACA accuracy
• 0.75% basic OHM accuracy
• 1.0 % FREQUENCY accuracy
• 2.0 % CAPACITANCE accuracy
• CONTINUITY and DIODE Test
• 300V protection in non-current ranges
• 500V dual fuses protection
• Auto Power Shut Off
• 1.5 m drop proof
• Protective Holster with tilt stand
• IEC 1010-1 standard CAT. II 600V
What does it measure?
DC and AC Voltages - up to 300 V
DC/AC Current - up to 10A
Resistance and continuity tester - up to 20 MΩ
Diode - open circuit voltage up to 3.2V
Batteries?
150 hours (Alkaline)
Two 1.5V Alkaline type AAA batteries
Low battery indicator
Auto power off - approx 30 minutes after last operation
What does it include?
Installed battery
Test Leads
User manual
Dimensions:
Without Holster: Width 84 mm, Length 175 mm, Height 31 mm
With Holster: Width 95 mm, Length 192 mm, Height 50 mm
Typical Applications:
A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries
Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
What is the difference between an analogue and a digital multimeter?
The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.
Standards
IEC 61010-1: CAT.II 300V/CAT.III 300V
Attribute | Value |
|---|---|
| Multimeter Type | Handheld |
| Model Number p | IDM93N |
| Display Type | Digital |
| Functions Measured | AC Current, AC Voltage, Capacitance, Conductance, DC Current, DC Voltage, Diode, Frequency, Resistance, RMS, Temperature |
| Absolute Maximum DC Current Measurement | 10A dc |
| Absolute Maximum AC Current Measurement | 10A ac |
| Absolute Maximum AC Voltage Measurement | 600V ac |
| Absolute Maximum Resistance Measurement | 20MΩ |
| Absolute Maximum DC Voltage Measurement | 300V dc |
| Absolute Maximum Capacitance Measurement | 200µF |
| Maximum Frequency | 200kHz |
| DC Current Measurement Resolution | 0.1µA dc |
| AC Current Measurement Resolution | 0.1µA ac |
| DC Voltage Measurement Resolution | 0.1mV dc |
| Resistance Measurement Resolution | 100mΩ |
| AC Voltage Measurement Resolution | 0.1mV ac |
| Capacitance Measurement Resolution | 1pF |
| Safety Category Level | CAT II |
| Height | 192mm |
| Minimum Operating Temperature | 0°C |
| Best Capacitance Measurement Accuracy | ±2% + 4 Digits |
| Best AC Voltage Accuracy | ±1.3% + 4 Digits |
| Best DC Voltage Accuracy | ±0.5% + 1 Digits |
| Dimensions | 95 x 50 x 192mm |
| Weight | 550 (With Holster)g |
| Length | 95mm |
| Best AC Current Accuracy | ±2.5% + 3 Digits |
| Width | 50mm |
| Battery Type | 9V, AAA 1.5V x 2, AM4, IEC LR03, IEC6F22, NEDA 1604 |
| Best DC Current Accuracy | ±1% + 1 Digits |
| Maximum Operating Temperature | +50°C |
| Safety Category Voltage | 600V |
| Best Resistance Measurement Accuracy | ±0.8% + 1 Digits |
- COO (Country of Origin):
- TW