Fluke LinkIQ DUO Cable+Wi-Fi+Network Network Tester RJ45, USB, Internal Antenna

RS庫存編號:: 434-344
製造零件編號:: LIQ-DUO-KIT-H6-UK
製造商:: Fluke

Fluke LinkIQ DUO Cable+Wi-Fi+Network Network Tester RJ45, USB, Internal Antenna

小計（1 件）*

HK$48,760.10

訂單超過 HK$250.00 免費送貨

有庫存

5 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	HK$48,760.10

* 參考價格

RS庫存編號:: 434-344
製造零件編號:: LIQ-DUO-KIT-H6-UK
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Equipment Type	Network Tester
	Product Type	Cable Tracer
	Connector Type	RJ45, USB, Internal Antenna
	Tone	Yes
	Model Number	LinkIQ DUO Cable+Wi-Fi+Network
	Power Source	Battery
	Battery Type	Lithium-ion
	Battery Life	8h
	Display Type	Capacitive Touch Display
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	45°C
	Weight	624g
	Standards/Approvals	Ethernet Alliance to IEEE 802.3af/at/bt
	Length	220mm
	Height	50mm
	Plug Type	USB Type C

	選取全部
	品牌 Fluke
	Equipment Type Network Tester
	Product Type Cable Tracer
	Connector Type RJ45, USB, Internal Antenna
	Tone Yes
	Model Number LinkIQ DUO Cable+Wi-Fi+Network
	Power Source Battery
	Battery Type Lithium-ion
	Battery Life 8h
	Display Type Capacitive Touch Display
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 45°C
	Weight 624g
	Standards/Approvals Ethernet Alliance to IEEE 802.3af/at/bt
	Length 220mm
	Height 50mm
	Plug Type USB Type C

COO (Country of Origin):: US

Fluke Cable Tracer, 8h Battery Life, 624g Weight - LIQ-DUO-KIT-H6-UK

This cable tracer is a handheld tester designed to verify twisted-pair cabling and diagnose network connectivity in industrial and commercial installations. It combines frequency-based cable qualification up to 10GBASE-T with Active Ethernet diagnostics and optional Wi‑Fi analysis to support commissioning, fault location and troubleshooting across structured and industrial Ethernet links.

Features & Benefits

• Frequency-based tests validate bandwidth up to 10Gb/s and indicate pass/fail
• Measures distance to opens, shorts and unterminated conductors
• Identifies wire map faults including miswired and split pairs
• Ethernet diagnostics show nearest switch, port and VLAN details
• Performs IPv4 and v6 ping tests with response time reporting
• Conducts PoE verification with class detection and loaded power measurement

Applications

• Suitable for commissioning 10Gb/s copper data links in data centres
• Ideal for troubleshooting PoE cameras and access points on switches
• Used for validating Industrial Ethernet cabling with M12/M8 interfaces
• Can be used for on-site Wi‑Fi surveys where 6GHz operation is permitted
• Used with documentation workflows to export results and generate reports

How long does the unit run on a single charge?

The rechargeable lithium‑ion pack delivers approximately 8 h of typical operation and charges via USB‑C.

Which interfaces are available for physical connection?

The tester provides an RJ45 test port Plus USB‑C host Interface and internal antenna on Wi‑Fi capable variants.

How many test results can be stored for reporting?

The instrument stores up to 1,000 named results which can be exported for PC reporting.

What Wi‑Fi bands are analysed by the device?

When enabled, the analyser receives 2.4 GHz, 5 GHz and 6 GHz bands with transmission limited to frequencies authorised for the country of sale.

What environmental limits apply during operation?

Intended for use between 0 °C and 45 °C with operating humidity limits specified for higher temperature ranges.