The RSS260 is a non contact safety switch with RFID technology whish is designed for applications in safety circuits and is used for monitoring the position of movable separating safety guards. In addition to its compact design and high protection against tampering, it is suitable for removable, rotatable and sliding protection equipment. The RSS260 is suitable for both installations on aluminium profiles, as well as for use on many different door sizes like the frequently used Plexiglas doors and panels. You can choose the appropriate sensor-actuator combination for your application, depending on the door and the door direction of movement. Even with the coding you have all the freedom you need and you can use the teach function as often as you want or code individually. Thanks to RFID technology, a high tamper protection is ensured despite the flexibility.
Thermoplastic enclosure High protection against tampering through RFID technology Compact, subtle and elegant design Easy installation without additional angles Universal application through different targets for typical installation situations Repeated universal or individual coding Preservation of safety levels and diagnostic capability even when connected in series Maximum of 31 sensors can be wired in series IP65, IP67 to IEC/EN 60529
Actuators
Stock no. 880-1836 is for a swivel door with frame, no interfering contour of the door cutout Stock no. 880-1845 is for a Plexiglas door, flat design, discreet appearance Stock no. 880-1848 is for a sliding door, smallest size, embedded in Plexiglas
Note
Actuators must be ordered separately.
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 62061.
Approvals
TUV, cULus.
Schmersal Safety Sensor Switch, RFID, 100ms Reaction Time - RSS16 Series - RSS260-I2-SD-ST
Automate the locking of your doors in the event of an emergency with this non-contact safety sensor switch from Schmersal. The switch is coded using RFID (radio frequency identification) technology, so it will only work with an actuator that uses the same frequency. This makes the switch tamperproof for enhanced safety. You can use this device in harsh industrial environments thanks to its thermoplastic housing, which is resistant to impact and heat. This material is also self-extinguishing for safety in the event of a fire.
Features & Benefits
• Features yellow, green and red LEDs for easy monitoring of operating status, supply voltage and faults • Screw terminal connections for simple and secure installation • Fast reaction time of 100ms for a rapid switching response • Compact dimensions of 29.5 (length) x 39.2 (width) x 18mm (height) for installation in tight spaces • Non-contact operation means there's no mechanical wear for a long service life
Applications
• Factories and workshops • Automation systems • Industrial machinery
Whats the operating temperature of this safety switch?
This safety switch has a wide operating temperature range of -25°C to +65°C, making it suitable for use in demanding environments.
Attribute
Value
Supply Voltage
20.4 → 26.4V dc
Housing Material
Plastic
Connection Type
M8
Actuator Type
Unique Coded
Sensor Principle
RFID
Safety Category
3
Actuator Included
No
Switching Distance
10 (Front Sao ON) mm, 12 (Front Sn) mm, 15 (Lateral Sar OFF) mm, 18 (Front Sar OFF) mm, 6 (Lateral Sao ON) mm, 9 (Lateral Sn) mm
Series
RSS 260
IP Rating
IP65, IP67
Supply Current
600mA
Length
39.2mm
Width
29.5mm
Number of Approach Directions
2
Standards Met
BG-GS-ET-14, CE Listed, cULus Listed, EN 60079-0, EN 60079-15, EN 60079-31, EN ISO 13849-1, IEC 60947-5-3, TUV