STMicroelectronics Compact 27W USB Type-C Power Delivery 3.1 with PPS adapter reference design Power Management for
- RS庫存編號:
- 210-8295
- 製造零件編號:
- STEVAL-USBPD27S
- 製造商:
- STMicroelectronics
可享批量折扣
小計(1 件)*
HK$936.80
訂單超過 HK$250.00 免費送貨
供應短缺
- 加上 24 件從 2025年12月08日 起發貨
我們目前的可售庫存有限,並且我們的供應商預計會出現供應短缺的狀況。
單位 | 每單位 |
|---|---|
| 1 - 4 | HK$936.80 |
| 5 + | HK$918.00 |
* 參考價格
- RS庫存編號:
- 210-8295
- 製造零件編號:
- STEVAL-USBPD27S
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Power Management Function | Power Management | |
| Kit Classification | Evaluation Kit | |
| Featured Device | STEVAL | |
| Kit Name | Compact 27W USB Type-C Power Delivery 3.1 with PPS adapter reference design | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Power Management Function Power Management | ||
Kit Classification Evaluation Kit | ||
Featured Device STEVAL | ||
Kit Name Compact 27W USB Type-C Power Delivery 3.1 with PPS adapter reference design | ||
The STEVAL-USBPD27S 27 W AC-DC adapter reference design works as USB Power Delivery Provider with a single USB Type-C port supporting Programmable Power Supply (PPS) and featuring adaptive synchronous rectification. Thanks to a minimal bill of materials, it allows users to easily design compact and cost-effective adapters.
The reference design accepts a wide range of input voltage and delivers two well regulated fixed PDOs (5V@5A, 9V@3A) and two APDOs (5VProg@5A and 9VProg@3A), finely adjusted to the advertised voltage range (Programmable Power Supply or PPS), thus managing the VCONN, as requested by the USB Power Delivery specification.
The adapter meets the most stringent energy saving recommendations (EU CoC – Tier 2 ver. 5 and DOE Level VI) ensuring < 40 mW of no load power consumption. All PDOs are compliant with CoC ver. 5 – Tier 2 and DOE Level VI requirements except the 9VProg@3A APDO, guaranteeing the compliance with the minimum four-point average efficiency in active mode.
The system has been tested to verify conducted noise emissions and compliance with the EN55022 (Class B) using standard average detectors, at half and full load with input voltage of 115 VAC and 230 VAC.
- Certified USB Power Delivery 3.1 Power Brick (TID: 5445)
- Universal input mains voltage range: 90 VAC to 264 VAC (line frequency: 45 Hz to 65 Hz)
- PD Output
- Two fixed PDOs: 5V@5A, 9V@3A
- Two APDOs (PPS): 5VProg@5A, 9VProg@3A
- PPS Mode: 20 mV step for CV, 50 mA step for CC
- Output Power: 27 W
- Minimum four-point average efficiency in active mode compliant with CoC ver. 5 – Tier 2 and DOE Level VI requirement
- 40 mW no-load standby power
- Adaptive Synchronous Rectification controlled by on-board MCU
- Load feed-forward
- OVP, UVP, OC, short-circuit protections
- ESD Protection exceeding IEC61000-4-2 Level 4 on CC lines
- Immunity against surge current on VBUS pin up to 35 A in a 8/20 μs waveform, according to IEC61000-4-5
- Compliant with EN55022 (Class B) standard for conducted noise emissions
- Compact form factor:
- 59x35x21mm dimensions
- 10.2 W/inch3 power density
- RoHS compliant
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
相关链接
- STMicroelectronics Compact, Customizable And Configurable Reference Design For Battery Operated BLDC/PMSM Power Tools
- STMicroelectronics Reference Design Kit for STSPIN233 for Gimbal Controller
- STMicroelectronics Reference Design Based on STSPIN32F0B for Power Tools Driven by LV BLDC Motors Motor Controller for
- STMicroelectronics ST STSPIN32G4 Reference Design Reference Design Development Board EVLSPIN32G4-ACT
- STMicroelectronics Electronic Speed Controller Reference Design Based on STSPIN32F0A for Electronic Speed Controller
- STMicroelectronics 2 kW Two-Channel Interleaved PFC Reference Design Based on the STNRGPF12 Digital Controller PFC
- Infineon Reference Design CYUSBS232
- Microchip Reference Design Energy Meter for MCP3905
